The purpose of this article is to investigate the effect of various process parameters such as compaction pressure, sintering temperature, and time on the physio-mechanical properties of a powder metallurgy-fabricated composite made of pure aluminium/alumina. Temperatures (580°C, 600°C, and 630°C), periods (1.5, 2, and 2.5 hr), compacting loads (30KN-65KN), and alumina percentages (2, 4, 6, and 8weight percent) are all considered. X-ray diffraction (XRD) and X-ray fluorescence spectroscopy (XRF) studies are carried out to determine the phases present and their proportions. Crystallite size study is performed using XRD data, and the Al+4 weight % alumina composite has the smallest size of any composite tested. For optimization, sintering density, porosity, and microhardness are calculated. Scanning electron microscopy (SEM) is used to analyse the different microstructures. At 600°C, 2 hr of operating time, and 4weight% alumina additions, the highest sintering density and microhardness are found.

The interaction of nicotinic acid and thiourea with the chloride salts of Ca(II), Mg(II), Co(II), Ni(II), Cu(II), and Fe(III) ions led to the synthesis of a unique series of metal chelates. All formed metal complexes were clarified using a variety of analytical and spectral techniques, besides magnetic moment and thermal tests. The electronic and magnetic measurements indicated that the paramagnetic chelates (3) and (4), as well as the diamagnetic complexes (1) and (2), were responsible for the tetrahedral geometrical structure. The outcomes also led to the production of square-planar, and high-spin octahedral structures for chelates (5) and (6). Thermodynamic studies using activation energy values revealed that complex (1) is more thermally stable than complex (2) and complex (3) is more stable than complex (4). Fe(III) complex exhibits higher antibacterial and antifungal activities than other metal complexes. Chelate (6) exhibits the highest rate of germination in wheat.

Here derivatives of imidazo[2,1-b][1,3]thiazines are attractive objects for organic and medicinal chemists. In the present work chemoselective conditions for oxidation of the sulfur atom in the 6-(2-pyridinyloxy)substituted (benzo)imidazo[2,1-b][1,3]thiazines to the corresponding sulfoxides were proposed and their synthesis was performed. Synthesized sulfoxides exist in the diastereomeric mixture and individual diastereomers 2a-e and 3a-e were obtained using a chromatographic technique. The structure of compounds 2a-e and 3a-e were characterized using ¹H, ¹³C NMR, LC-MS spectra, and X-ray analysis for derivative 2b. The anti-inflammatory activity screening in vivo was performed using the carrageenan model of inflammatory paw edema in white rats for all the diastereomeric mixtures and individual diastereomers. Diastereomer 2c possessed an anti-inflammatory effect with an inflammation inhibition index of 46.1% which was equal to the activity of the reference drug diclofenac sodium.

In this work, the multifunctional potential of four 3-acetylcoumarin derivatives was studied. The derivatives were significantly active against bacteria Staphylococcus aureus, Pseudomonas aeoginosa and fungal strain Candida albicans. The results of antioxidant activity assays were promising when compared to ascorbic acid. The in vitro anticancer activity was carried out using MTT assay on human cancer cell line COLO-205 and 3ACDT showed commendable antiproliferative activity along with appreciable tumor selectivity with distinct selectivity index. Moreover, ADMET properties of the compounds were determined using the pKCSM and SwissADME online tools and all compounds were found with good pharmacokinetic profile. Hence, from the obtained results from all the 3-acetylcoumarin derivatives, 3ACDT exhibited good therapeutical potential and can be optimized for lead development.

The 1,3,4-Oxadiazole is an aromatic heterocyclic moiety recognized in drug research for its low lipophilicity. The multiple functionalities, heterocyclic azinane, sulfonamide, 1,3,4-oxadiazole and acetamide, are combined collectively to enhance the bioactivity potential of synthesized molecules. All the compounds were acquired by following microwave assisted and conventional techniques in a comparative way. The synthesized derivatives were screened for their antibacterial and enzyme inhibition potential. Furthermore, BSA binding analysis was executed to infer about the interaction with serum albumin. The spectral data of IR, EI-MS, ¹H-NMR and ¹³C-NMR were used to elucidate the final structures of compounds. The synthesized compounds had a modest antibacterial potential. Compound 8f bearing 2-methyl-4,5-dinitrophenyl group was the most active one against all the bacterial strains taken into account and α-glucosidase enzyme. Compound 8d bearing 4-nitrophenyl group was the best acetyl cholinesterase inhibitor and 8i bearing phenylethyl group was the best urease inhibitor.

Condensation product of o-aminophenol and pyrrole-2-carboxylaldehyde behaves as a fluorescent sensor for Fe³⁺ and Sn²⁺ ions in aqueous medium over the other metal ions like Na⁺, K⁺, Mg²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Mn²⁺ and Cr³⁺. In aqueous solution, Fe³⁺ and Sn²⁺ ions coordinate to the receptor through a NON binding site which induces a strong fluorescence enhancement. Receptor can be applied as fluorescence enhanced probes for transition metal ions due to the inhibition of photo induced electron transfer (PET) mechanism.

Many researchers are attracted to Chitosan based blends due to its properties and potential applications in various fields. The advanced development of Chitosan blends integrates the science and technology of blended materials. The present experimentation is reporting the preparation of Chitosan and Agar-Agar blends (CCA) by chemical mixing of these materials at different compositions. The thermal studies of the prepared blends were studied by differential scanning colorimeter (DSC) and thermogravimetric analysis (TGA) tools. Thermal studies reveal that the lowest degradation temperatures of blends might be attributed to the partial miscibility of CAA blends at particular composition and miscibility due to single glass transition temperature (T_g) between Chitosan and Agar-agar. Bonding nature of sample blends were carried out by Fourier transform infrared (FT-IR) instrumentation. This study reveals the interaction between Chitosan and Agar-agar is partial miscibility. Morphological study reveals that a few aggregated particles, which suggest the partial miscibility of CAA blends. Homogeneity of blend compositions and specific intermolecular interactions of hydrogen bonding type is also observed.

The dissipation and side-effect of metribuzin (MBZ) were studied with various factors; two soil types (clay loam and sandy loam), soil amendment (wheat straw and without amendment), two temperature levels (25 and 50°C), sterilization (sterilized and unsterilized soil) and time of incubation (15 and 30 days) and designed by Windows version of MINITAB software package to reduce the time and the cost as well as increased the precision. Determination of MBZ by HPLC with recoveries ranged from 50.85 to 108.09%. The MBZ residues were detected in all samples up to 60 days of storage, respectively with decline in their concentrations with the time of incubation. The clay loam soil showed higher dissipation than the sandy loam soil. The different factors in the present study confirmed that the wheat straw amendment, non-sterilization and incubation at 50°C caused higher dissipation of MBZ than without wheat straw, sterilization and incubation at 25°C. The dissipation was described mathematically by a first order equation with t0.5 was ranged from 9.62 to 16.82 days in clay loam soil and from 10.01 to 16.04 days in sandy loam soil. The side-effect of MBZ was tested on soil dehydrogenase activity that can be considered as an indicator of the biological activity and microbial degradation. The result proved that the enzyme activity was significantly decreased in all treatments compared with the controls at 1 and 3 days of incubation then it was gradually increased at 7, 10, 15 and 30 days of incubation. Treatments of wheat straw, non-sterilized and incubated at 25°C or 50°C showed the lowest enzyme inhibition among all treatments.

In the present work, we have discussed the synthesis of a series of 1-((2'-(2-(2-(substitutedphenyl))-2-oxoethyl)-2H-tetrazol-5-yl)-[1,1'-biphenyl]-4-yl)methyl)piperidine-4-carboxylic acid derivatives by the reaction of 1-((2'-(2H-tetrazol-5-yl)-[1,1'-biphenyl]-4-yl)methyl)piperidine-4-carboxylic acid with phenacyl bromides using potassium carbonate. The structures of synthesized derivatives have been characterized using different spectroscopic techniques like FT-IR, ¹H-NMR, ¹³C-NMR, and Mass. Synthesized compounds were screened for their antibacterial and anti-TB activities all the compounds have found better activity against selected pathogenic strains. In addition, in silco molecular docking studies were carried out on targeted enzymes DNA gyrase and 3-oxoacyl-ACP reductase with ADME-toxicology studies.

A novel 1,3,4-thiadiazole containing 2-iminothiazolidine-4-ones 4a-b were synthesized through the reaction of 2-chloro-N-(5-ethyl/allylsulfanyl-[1,3,4]thiadiazol-2-yl)-acetamides 1a-b with ammonium thiocyanate in dry acetone. Condensation of 4a-b with various carbonyl compounds according to the standard Knoevenagel procedure yielded the corresponding 5-arylidene- (5a-d), 5-heterylidene- (6a-c), 5-isatinylidene- (7a-b) and 5-(3-phenyl-2-propene-1-ylidene)- (8a-b) derivatives. All the newly synthesized compounds were confirmed by their elemental analysis and spectral data. Synthesized compounds 4a, 5a, 5b, 6a, 6c and 7a were screened for their in vitro antitrypanosomal activity against T. brucei gambience (Feo strain). The 5-ylidene substituted compounds with S-allyl group in position 5 of thiadiazole cycle (5a, 5b, 6a and 7a) displayed good to excellent antitrypanosomal potency with a range IC50 = 7.3-12.8 µM.