How to cite this paper
Tekletsadik, S. (2023). Quality improvement through export item rejection reduction using the implementation of statistical quality control (SQC) tools: a case study.Management Science Letters , 13(1), 33-40.
Refrences
Abdel-Hamid, M., & Abdelhaleem, H. M. (2019). Improving the Construction Industry Quality Using the Seven Basic Quality Control Tools. Journal of Minerals and Materials Characterization and Engineering, 7(06), 412–420. https://doi.org/10.4236/jmmce.2019.76028
Addis, S. (2019). Study on the Application of Statistical Quality Control Techniques in Shoe Manufacturing for Quality Improvements. European Journal of Engineering and Technology, 7(6), 37–49.
Ahmed, M., Islam, T., & Ali, S. (2019). Study on different types of defects and their causes and remedies in garments in-dustry. Journal of Textile Engineering & Fashion Technology, 5(6), 300–304. https://doi.org/10.15406/jyeft.2019.05.00217
Bhatt, P., Singla, R. (2017). Metal Casting Defect By Using Quality Control Tools on Trumpet Housing of a Tractor. In-ternational Journal of Scientific & Engineering Research, 8(12), 255–263.
Chokkalingam, B., Raja, V., Anburaj, J., Immanual, R., & Dhineshkumar, M. (2017). Investigation of Shrinkage Defect in Castings by Quantitative Ishikawa Diagram. Foundry Commission of the Polish Academy of Sciences, 17(1), 174–178.
Erdhianto, Y. (2021). Quality Control Analysis To Reduce the Number of Defects in the Packaging of Pg Kremboong Sug-ar Products Using Seven Tools Method. Tibuana, 4(01), 28–35. https://doi.org/10.36456/tibuana.4.01.3174.28-35
G.R.Naik, A. B. V. ,. (2015). Quality Improvement for Dimensional Variations in sand Casting Using Quality Control Tools. International Journal of Innovative Research in Science, Engineering and Technology, 4(8), 6917–6926. https://doi.org/10.15680/ijirset.2015.0408030
Islam, M. M., & Hossain, M. M. (2013). Statistical quality control approach in typical garments manufacturing industry in Bangladesh: A case study. Preceedings of 9th Asian Business Research Conference, December 2013, 20–21.
Kolte, P. P., & Chandurkar, P. W. (2018). Performance Improvement in Apparel Industry by Reducing DHU %. Interna-tional Journal on Textile Engineering and Processes, 4(April), 23–30.
Liliana, L. (2016). A new model of Ishikawa diagram for quality assessment. IOP Conference Series: Materials Science and Engineering, 161(1). https://doi.org/10.1088/1757-899X/161/1/012099
Memon, I. A., Jamali, Q. B., Jamali, A. S., Abbasi, M. K., Jamali, N. A., & Jamali, Z. H. (2019). Defect Reduction with the Use of Seven Quality Control Tools for Productivity Improvement at an Automobile Company. Engineering, Technol-ogy & Applied Science Research, 9(2), 4044–4047. https://doi.org/10.48084/etasr.2634
Miglani, T., & Rana, K. S. (2018). Relationship between key factors of operation management affecting the operation cost in Phetchabun small and medium industrial entrepreneurs: Variables in manufacture defect and operating times, Ratchaphruek Journal, 5(12), 15–26.
Neyestani, B. (2017). Seven Basic Tools of Quality Control: The Appropriate Techniques for Solving Quality Problems in the Organizations. SSRN Electronic Journal, 77941. https://doi.org/10.2139/ssrn.2955721
Nitesh Kumar Sahoo. (2020). Efficiency Improvement by Reducing Rework and Rejection on the Shop Floor. Internation-al Journal of Engineering Research And Technology, 9(06), 1185–1191. https://doi.org/10.17577/ijertv9is060857
Nurdin, H., & Purba, H. H. (2018). Aplication of Quality Control Tools to Reducing Defect Product in a Surfactant and Chemicals Industry. International Journal of Modern Trends in Engineering & Research, 4(12), 261–271. https://doi.org/10.21884/ijmter.2017.4412.tv1z5
Patil, M. N. S., Rajkumar, S. S., Chandurkar, M. P. W., & Kolte, P. P. (2017). Minimization of Defects in Garment during Stitching. International Journal on Textile Engineering and Processes, 3(1), 24–29.
Raman, R. S., & Basavaraj, Y. (2019). Quality Improvement of Capacitors through Fishbone and Pareto Techniques. In-ternational Journal of Recent Technology and Engineering, 8(2), 2248–2252. https://doi.org/10.35940/ijrte.b2444.078219
Sanny, L., & Ria, A. (2015). Quality Improvement Strategy to Defect Reduction with Seven Tools Method. International Business Management, 9(4), 445–451.
Silva de Santis, S. H. da, & Pereira Marcicano, J. P. (2016). Use of Quality Tools for Problem Analysis (FMEA and Ishi-kawa Diagram) in a Small Textile Business. Journal of Textile Science & Engineering, 6(3). https://doi.org/10.4172/2165-8064.1000258
Suryoputro, M. R., Sugarindra, M., & Erfaisalsyah, H. (2017). Quality Control System using Simple Implementation of Seven Tools for Batik Textile Manufacturing. IOP Conference Series: Materials Science and Engineering, 215(1). https://doi.org/10.1088/1757-899X/215/1/012028
Tejaningrum, A. (2017, July). Analysis of Statistical Quality Control by Control Chart to Reduce the Variability of The Product. In 2017 International Conference on Organizational Innovation (ICOI 2017) (pp. 38-44). Atlantis Press. https://doi.org/10.2991/icoi-17.2017.8
Terwadkar, A. R., Sahasrabuddhe, A. V, & Kulkarni, M. M. (2020). Implementation of Statistical Quality Control Tech-niques to Minimize the Casting Defects. International Research Journal of Engineering and Technology (IRJET), 7(12), 1533–1544.
Yunus, M. F. M., Taib, C. A., & Iteng, R. (2017). A Critical Assessment on the Implementation of Statistical Quality Con-trol Tool Among SMEs Food Industry in Malaysia. International Journal of Academic Research in Business and Social Sciences, 7(10), 467–477. https://doi.org/10.6007/ijarbss/v7-i10/3394
Addis, S. (2019). Study on the Application of Statistical Quality Control Techniques in Shoe Manufacturing for Quality Improvements. European Journal of Engineering and Technology, 7(6), 37–49.
Ahmed, M., Islam, T., & Ali, S. (2019). Study on different types of defects and their causes and remedies in garments in-dustry. Journal of Textile Engineering & Fashion Technology, 5(6), 300–304. https://doi.org/10.15406/jyeft.2019.05.00217
Bhatt, P., Singla, R. (2017). Metal Casting Defect By Using Quality Control Tools on Trumpet Housing of a Tractor. In-ternational Journal of Scientific & Engineering Research, 8(12), 255–263.
Chokkalingam, B., Raja, V., Anburaj, J., Immanual, R., & Dhineshkumar, M. (2017). Investigation of Shrinkage Defect in Castings by Quantitative Ishikawa Diagram. Foundry Commission of the Polish Academy of Sciences, 17(1), 174–178.
Erdhianto, Y. (2021). Quality Control Analysis To Reduce the Number of Defects in the Packaging of Pg Kremboong Sug-ar Products Using Seven Tools Method. Tibuana, 4(01), 28–35. https://doi.org/10.36456/tibuana.4.01.3174.28-35
G.R.Naik, A. B. V. ,. (2015). Quality Improvement for Dimensional Variations in sand Casting Using Quality Control Tools. International Journal of Innovative Research in Science, Engineering and Technology, 4(8), 6917–6926. https://doi.org/10.15680/ijirset.2015.0408030
Islam, M. M., & Hossain, M. M. (2013). Statistical quality control approach in typical garments manufacturing industry in Bangladesh: A case study. Preceedings of 9th Asian Business Research Conference, December 2013, 20–21.
Kolte, P. P., & Chandurkar, P. W. (2018). Performance Improvement in Apparel Industry by Reducing DHU %. Interna-tional Journal on Textile Engineering and Processes, 4(April), 23–30.
Liliana, L. (2016). A new model of Ishikawa diagram for quality assessment. IOP Conference Series: Materials Science and Engineering, 161(1). https://doi.org/10.1088/1757-899X/161/1/012099
Memon, I. A., Jamali, Q. B., Jamali, A. S., Abbasi, M. K., Jamali, N. A., & Jamali, Z. H. (2019). Defect Reduction with the Use of Seven Quality Control Tools for Productivity Improvement at an Automobile Company. Engineering, Technol-ogy & Applied Science Research, 9(2), 4044–4047. https://doi.org/10.48084/etasr.2634
Miglani, T., & Rana, K. S. (2018). Relationship between key factors of operation management affecting the operation cost in Phetchabun small and medium industrial entrepreneurs: Variables in manufacture defect and operating times, Ratchaphruek Journal, 5(12), 15–26.
Neyestani, B. (2017). Seven Basic Tools of Quality Control: The Appropriate Techniques for Solving Quality Problems in the Organizations. SSRN Electronic Journal, 77941. https://doi.org/10.2139/ssrn.2955721
Nitesh Kumar Sahoo. (2020). Efficiency Improvement by Reducing Rework and Rejection on the Shop Floor. Internation-al Journal of Engineering Research And Technology, 9(06), 1185–1191. https://doi.org/10.17577/ijertv9is060857
Nurdin, H., & Purba, H. H. (2018). Aplication of Quality Control Tools to Reducing Defect Product in a Surfactant and Chemicals Industry. International Journal of Modern Trends in Engineering & Research, 4(12), 261–271. https://doi.org/10.21884/ijmter.2017.4412.tv1z5
Patil, M. N. S., Rajkumar, S. S., Chandurkar, M. P. W., & Kolte, P. P. (2017). Minimization of Defects in Garment during Stitching. International Journal on Textile Engineering and Processes, 3(1), 24–29.
Raman, R. S., & Basavaraj, Y. (2019). Quality Improvement of Capacitors through Fishbone and Pareto Techniques. In-ternational Journal of Recent Technology and Engineering, 8(2), 2248–2252. https://doi.org/10.35940/ijrte.b2444.078219
Sanny, L., & Ria, A. (2015). Quality Improvement Strategy to Defect Reduction with Seven Tools Method. International Business Management, 9(4), 445–451.
Silva de Santis, S. H. da, & Pereira Marcicano, J. P. (2016). Use of Quality Tools for Problem Analysis (FMEA and Ishi-kawa Diagram) in a Small Textile Business. Journal of Textile Science & Engineering, 6(3). https://doi.org/10.4172/2165-8064.1000258
Suryoputro, M. R., Sugarindra, M., & Erfaisalsyah, H. (2017). Quality Control System using Simple Implementation of Seven Tools for Batik Textile Manufacturing. IOP Conference Series: Materials Science and Engineering, 215(1). https://doi.org/10.1088/1757-899X/215/1/012028
Tejaningrum, A. (2017, July). Analysis of Statistical Quality Control by Control Chart to Reduce the Variability of The Product. In 2017 International Conference on Organizational Innovation (ICOI 2017) (pp. 38-44). Atlantis Press. https://doi.org/10.2991/icoi-17.2017.8
Terwadkar, A. R., Sahasrabuddhe, A. V, & Kulkarni, M. M. (2020). Implementation of Statistical Quality Control Tech-niques to Minimize the Casting Defects. International Research Journal of Engineering and Technology (IRJET), 7(12), 1533–1544.
Yunus, M. F. M., Taib, C. A., & Iteng, R. (2017). A Critical Assessment on the Implementation of Statistical Quality Con-trol Tool Among SMEs Food Industry in Malaysia. International Journal of Academic Research in Business and Social Sciences, 7(10), 467–477. https://doi.org/10.6007/ijarbss/v7-i10/3394