In this article, we consider a single-unit unreliable production system which produces a single item. During a production run, the production process may shift from the in-control state to the out-of-control state at any random time when it produces some defective items. The defective item production rate is assumed to be imprecise and is characterized by a trapezoidal fuzzy number. The production rate is proportional to the demand rate where the proportionality constant is taken to be a fuzzy number. Two production planning models are developed on the basis of fuzzy and stochastic demand patterns. The expected cost per unit time in the fuzzy sense is derived in each model and defuzzified by using the graded mean integration representation method. Numerical examples are provided to illustrate the optimal results of the proposed fuzzy models.

This paper presents two models, a periodic review model and a continuous review inventory model with fuzzy setup cost, holding cost and shortage cost. We use two methods in the name of signed distance and possibilistic mean value to defuzzify. Also we consider the lead time demand and the lead-time plus one period’s demand as random variables. To validate the models and the solution procedures we apply them to a transformer manufacturing, 'Iran transfo', company. Furthermore we design a decision support system which can be used for efficient evaluation of the proposed models in fuzzy environment.

:In this paper, we present a multi-objective possibilistic programming model to locate distribution centers (DCs) and allocate customers' demands in a supply chain network design (SCND) problem. The SCND problem deals with determining locations of facilities (DCs and/or plants), and also shipment quantities between each two consecutive tier of the supply chain. The primary objective of this study is to consider different risk factors which are involved in both locating DCs and shipping products as an objective function. The risk consists of various components: the risks related to each potential DC location, the risk associated with each arc connecting a plant to a DC and the risk of shipment from a DC to a customer. The proposed method of this paper considers the risk phenomenon in fuzzy forms to handle the uncertainties inherent in these factors. A possibilistic programming approach is proposed to solve the resulted multi-objective problem and a numerical example for three levels of possibility is conducted to analyze the model.

In econometrics, the derivation of a theoretical model leads sometimes to two econometric models, which can be considered justified based on their respective approximation approaches. Hence, the decision of choosing one between the two hinges on applied econometric tools. In this paper, the authors develop a theoretical econometrics consumer maximization model to measure the flow of durables’ expenditures where depreciation is added to former classical econometrics model. The proposed model was formulated in both linear and logarithmic forms. Box-Cox tests were used to choose the most appropriate one among them. The proposed model was then applied to the historical data from the U.S. and China for a comparative study and the results discussed.

This paper examines the optimization of production involving a tandem two-machine system producing a single part type, with each machine being subject to random breakdowns and repairs. An analytical model is formulated with a view to solving an optimal stochastic production problem of the system with machines having up-downtime non-exponential distributions. The model developed is obtained by using a dynamic programming approach and a semi-Markov process. The control problem aims to find the production rates needed by the machines to meet the demand rate, through a minimization of the inventory/shortage cost. Using the Bellman principle, the optimality conditions obtained satisfy the Hamilton-Jacobi-Bellman equation, which depends on time and system states, and ultimately, leads to a feedback control. Consequently, the new model enables us to improve the coefficient of variation (CVup/down) to be less than one while it is equal to one in Markov model. Heuristics methods are used to involve the problem because of the difficulty of the analytical model using several states, and to show what control law should be used in each system state (i.e., including Kanban, feedback and CONWIP control). Numerical methods are used to solve the optimality conditions and to show how a machine should produce.

The economic lot scheduling problem (ELSP) is a challenge between sequencing and lot sizing. In this problem, several products must be produced on a single machine in a cyclical production pattern and the primary goal is to minimize the total setup and holding expenditures. Since time affects the value of money, it is necessary to take into account the time value of money when gradual payment is the case. In this paper, a new ELSP model with the consideration of the time value of money is considered. The proposed model of this paper is formulated as a nonlinear mixed integer model and a hybrid GA is presented to solve the resulted model for large-scale problems. The proposed method is solved for some benchmark problems for large-scale problems.

In this paper, we address the optimization of an integrated line balancing process with workstation inventory management. While doing so, we have studied the interconnection between line balancing and its conversion process. Almost each and every moderate to large manufacturing industry depends on a long and integrated supply chain, consisting of inbound logistic, conversion process and outbound logistic. In this sense an approach addresses a very general problem of integrated line balancing. Research works reported in the literature so far mainly deals with minimization of cost for inbound and outbound logistic subsystems. In most of the cases conversion process has been ignored. We suggest a generic approach for linking the balancing of the line of production in the conversion area with the customers’ rate of demand in the market and for configuring the related stock chambers. Thus, the main aim of this paper is to translate the underlying problem in the form of mixed nonlinear programming problem and design the optimum supply chain so that the total inventory cost and the cost of balancing loss of the conversion process is jointly minimized and ideal cycle time of the production process is determined along with ideal sizes of the stock chambers. A numerical example has been added to demonstrate the suitability of our approach.

This paper addresses a bi-criteria scheduling problem with deteriorating jobs on a single machine. We develop a model for a single machine bi-criteria scheduling problem (SMBSP) with the aim of minimizing total tardiness and work in process (WIP) costs. WIP cost increases as a job passes through a series of stages in the production process. Due to the uncertainty involved in real-world scheduling problems, it is sometimes unrealistic or even impossible to acquire exact input data. Hence, we consider the SMBSP under the hypothesis of fuzzy L-R processing time's knowledge and fuzzy L-R due date. The effectiveness of the proposed model and the denoted methodology is demonstrated through a test problem.

This paper proposes a particle swarm optimization (PSO) algorithm to solve various types of economic dispatch (ED) problems in power systems such as, environmental/economic dispatch (EED) and multi-area environmental/economic dispatch. The proposed model considers the environmental impact to achieve the minimization of fuel costs and pollutant emissions, simultaneously. The EED problem is further extended to dispatch the power among different areas to aid emission allowance trading. The performance of the proposed PSO is compared with conventional method and genetic algorithm. The results clearly show that the proposed algorithms give global optimum solution compared to the other methods. The results obtained also show that the proposed PSO algorithms can provide comparable dispatch solutions with reduced computation time for all types of ED problems.

Analytic Hierarchy Process (AHP) is one of the most popular approaches in the area of multiple attribute decision making (MADM). However, it is not practical any more if input information are fuzzy. In this paper, we propose a new method for fuzzy AHP which is especially useful to make decisions for multiple attribute problems. The method is developed by applying preference ratio concept which makes it practical since it assigns crisp weights and crisp scores to different alternatives. Two algorithms are proposed in this paper: The first one defines crisp and normalized weight by pairwise comparison with fuzzy data while the second one calculates fuzzy consistency ratio. The proposed method is applied to prioritize different short courses in a management school.