In the light of recent excess of reported crimes in various states and union territories (UTs) of India, it becomes imperative to evaluate the police performance of different states/UTs in order to identify the poor/under-performing ones requiring immediate attention. Although, a limited amount of research work has been carried out in this area, mainly employing data envelopment analysis approach, a definitive ranking of Indian states/UTs with respect to their police performance has never been derived using any of the multi-criteria decision making (MCDM) techniques. Thus, the aim of this paper is focused on evaluating and ranking of all the Indian states/UTs with respect to their performance in minimizing criminal activities while employing additive ratio assessment (ARAS) method as a simplistic MCDM tool. It is revealed that Chandigarh evolves out as the best performer amongst all the 35 Indian states/UTs, while West Bengal comes out as the worst performer. A detailed analysis of the results is also carried out to identify those Indian states/UTs where substantial improvement can be brought in.

A novel one-pot, solvent-free method for the synthesis of dithiocarbamates was developed through the reaction of corresponding alkyl halides, amines and carbon disulfide employing catalytic amount of benzyl trimethyl ammonium hydroxide (Triton-B). The reaction conditions are milder with extremely simple work-up procedures than the reported methods, afforded high yields (82-98%) of the desired products.

The corrosion inhibition efficiencies of two novel Schiff bases, namely (E)-3-[thiophen-2-ylmethyleneamino]benzoic acid (T2YMABA) and (E)-4-(5-[(2-phenylhydrazono) methyl]thiophen-2-yl)benzoic acid (PHMT2YBA) on mild steel (MS) in 1.0M HCl solution has been investigated and compared using electrochemical impedance spectroscopy and potentiodynamic polarization analysis. The Schiff bases exhibited very good corrosion inhibitions on mild steel in 1.0M HCl medium and the inhibition efficiency increased with the increase in concentration of the inhibitor. Polarization studies revealed that T2YMABA acted as a mixed type inhibitor whereas PHMT2YBA molecules acted as anodic inhibitor.

In open travelling salesman subset-tour problem (OTSSP), the salesman needs to traverse a set of k (≤n) out of n cities and after visiting the last city, the salesman does not necessarily return to the central depot. The goal is to minimize the overall traversal distance of covering k cities. The OTSSP model comprises two types of problems such as subset selection and permutation of the cities. Firstly, the problem of selection takes place as the salesman’s tours do not contain all the cities. On the other hand, the next problem is about to determine the optimal sequence of the cities from the selected subset of cities. To deal with this problem efficiently, a hybrid nearest neighbor technique based crossover-free Genetic algorithm (GA) with complex mutation strategies is proposed. To the best of the author’s knowledge, this is the first hybrid GA for the OTSSP. As there are no existing studies on OTSSP yet, benchmark instances are not available for OTSSP. For computational experiments, a set of test instances is created by using TSPLIB. The extensive computational results show that the proposed algorithm is having great potential in achieving better results for the OTSSP. Our proposed GA being the first evolutionary-based algorithm that will help as the baseline for future research on OTSSP.

A simple multi-attribute decision-making method based on ranking of alternatives and attributes is proposed in this paper. The method ranks the alternatives with respect to each of the attributes based on the corresponding performance measures. Similarly, the ranks are assigned to the attributes based on their importance as perceived by the decision maker. The ranks assigned to the alternatives with respect to each of the attributes and the ranks assigned to the attributes are converted to appropriate weights and the final composite scores of the alternatives are computed using these weights. An interesting feature of the proposed method is that the qualitative attributes (i.e. the attributes expressed in linguistic terms) need not require the use of fuzzy logic. The proposed method is very simple and useful in situations of limited time availability, presence of qualitative attributes, imprecise/incomplete/partial data, and decision maker’s limited attention and capability to process the information. The proposed method is proved easier and better compared to the other widely used decision-making methods. The proposed method will be tested further on more realistic problems of the industrial environment and the results will be reported soon.

Absenteeism is a major challenge for any organization in the current competitive world. Curbing absenteeism helps organizations achieve their targets and increases productivity. This study highlights the major causes of absenteeism in the production division of a garment industry under various dimensions, which influence on absenteeism like work environment, organizational culture, relation and co-operation, compensation and rewards, facilities, job satisfactory and security, and general factors. The Study helps to identify reasons for employee absenteeism in production division. Sample of 180 employees responses were considered for the study from the universe and the data were analysed, statistically. The study shows that the major factors like wages, other source of income, and bad relationship with supervisors were contributing to the major absence of employees from work. This clearly indicates that work environment, relation and co-operation, facilities provided by the organization and job satisfaction were the main components which are causing the employee absenteeism.

The main purpose of this research work is to present a reliability analysis of a two dissimilar parallel unit framework under the presumption that a framework’s unit may also fail during the preventive maintenance (PM). Only one repair man is available with the system. It has been assumed that he is well capable of doing every repair work including preventive maintenance. Here in this work we have assumed that failure and repair times of each unit are correlated. Utilizing regenerative point strategy different reliability attributes are obtained which are very much helpful to system/ framework designers and company managers. Graphical practices of mean time to system failure and profit/cost function have been studied.

Two sets of nine different silicon carbide particulate (SiCp) reinforced Al 7075 Metal Matrix Composites (MMCs) were fabricated using liquid metallurgy stir casting process. Mean particle size and weight percentage of the reinforcement were varied according to Taguchi L9 Design of Experiments (DOE). One set of the cast composites were then heat treated to T6 condition. Optical micrographs of the MMCs reveal consistent dispersion of reinforcements in the matrix phase. Mechanical properties were determined for both as-cast and heat treated MMCs for comparison of the experimental results. Linear regression models were developed for mechanical properties of the heat treated MMCs using list square method of regression analysis. The fabrication process parameters were then optimized using Taguchi based grey relational analysis for the multiple mechanical properties of the heat treated MMCs. The largest value of mean grey relational grade was obtained for the composite with mean particle size 6.18 µm and 25 weight % of reinforcement. The optimal combination of process parameters were then verified through confirmation experiments, which resulted 42% of improvement in the grey relational grade. Finally, the percentage of contribution of each process parameter on the multiple performance characteristics was calculated through Analysis of Variance (ANOVA).

Productivity is an indicator of efficiency with which resources, both human and material, are transformed into useful services and goods. The vital purpose of the prevailing work was to analyze the factors involved in the improvement of productivity in all its types such as material, capital, labor, machine and total productivity at the plant. This was obtained by decreasing the manufacturing cost per component by reducing its cycle time and increasing the monthly production rate. The experimentation revealed that using proposed processes and improved tooling, monthly production rate has increased by 16.2% due to reduced cycle time, the number of defected components i.e. rejection rate has reduced up to 2%. A reduction of 6.78% in manufacturing cost per component was recorded. Tooling cost has reduced by more than 12%. Saving up to 50% in inspection cost has been recorded due to close dimensional tolerances and high surface finish achieved on components. An increase of 4.84% was recorded in total productivity.

This study investigates the role played by service quality at manufacturer-distributor junction in small-medium manufacturing units, and presents a model that proposes and validates that contribution towards service quality on behalf of both the distributor and manufacturer leading to satisfaction as well as loyalty. The research design for this study includes a combination of literature review, exploratory interviews and a questionnaire survey conducted through interview schedule from 101 respondents working in different small-medium manufacturing units (SMEs) of North India. The study uses Structural Equation Modeling (SEM) to develop dual directional scales to measure service quality at manufacturer-distributor junction besides testing a set of propositions related to service quality. A model showing linkages of manufacturing organization’s service quality with distributor service quality leading to mutual satisfaction and loyalty is developed. The model is empirically tested and is found to be fit. This study would be of interest to SME practitioners interested in improving service quality w.r.t. distributors. This study finds support for strengthening relationships with distributors to achieve a win-win situation. Future researchers may validate this scale, and empirically test the proposed model in similar settings. Insights derived from this study may be transferred to other junctions of a manufacturing supply chain such as suppliers, retailers, employees and end customers.