How to cite this paper
Chakraborty, S., Bhattacharyya, B & Diyaley, S. (2019). Applications of optimization techniques for parametric analysis of non-traditional machining processes: A Review.Management Science Letters , 9(3), 467-494.
Refrences
Abuzied, H.H., Awad, M.A., & Senbel, H.A. (2012). Prediction of electrochemical machining process pa-rameters using artificial neural networks. International Journal of Computer Science Engineering, 4(1),125-132.
Acherjee, B., Prakash, S., Kuar, A. S., & Mitra, S. (2014). Grey relational analysis based optimization of underwater Nd: YAG laser micro-channeling on PMMA. Procedia Engineering, 97, 1406-1415.
Aggarwal, V., Khangura, S.S., & Garg, R.K. (2015). Parametric modeling and optimization for wire elec-trical discharge machining of Inconel 718 using response surface methodology. International Journal of Advanced Manufacturing Technology, 79(1-4), 31-47.
Aich, U., Banerjee, S., Bandyopadhyay, A., & Das, P. K. (2014). Multi-objective optimisation of abrasive water jet machining responses by simulated annealing and particle swarm. International Journal of Mechatronics and Manufacturing Systems, 7(1), 38-59.
Aich, U., & Banerjee, S. (2016). Application of teaching learning based optimization procedure for the development of SVM learned EDM process and its pseudo Pareto optimization. Applied Soft Compu-ting, 39, 64-83.
Anitha, J., Das, R., & Pradhan, M. K. (2016). Multi-objective optimization of electrical discharge machin-ing processes using artificial neural network. Jordan Journal of Mechanical and Industrial Engineer-ing, 10(1), 11-18.
Aultrin, K. J., & Anand, M.D. (2016). Multi-objective optimization of abrasive water jet machining of al-uminium 6061 alloy by grey relational analysis. Journal of Chemical and Pharmaceutical Sciences. 9(1), 410-417.
Aultrin, K. J., Anand, M.D., & Jose, P. (2012). Modelling the cutting process and cutting performance in abrasive water jet machining using genetic-fuzzy approach. Procedia Engineering, 38, 4013-4020.
Ay, M., Çaydaş, U., & Hascalik, A. (2013). Optimization of micro-EDM drilling of inconel 718 super al-loy. International Journal of Advanced Manufacturing Technology, 66(5), 1015-1023.
Azhiri, R.B., Teimouri, R., Baboly, M.G., & Leseman, Z. (2014). Application of Taguchi, ANFIS and grey relational analysis for studying, modelling and optimization of wire EDM process while using gaseous media. International Journal of Advanced Manufacturing Technology, 71(1-4), 279-295.
Baraskar, S.S., Banwait, S.S., & Laroiya, S.C. (2013). Multi-objective optimization of electrical discharge machining process using a hybrid method. Journal of Materials and Manufacturing Processes, 28(4), 348-354.
Behera, S., Satapathy, S., & Ghadai, S.K. (2015). Parameter optimisation of powder mixed EDM of alu-minium-based metal matrix composite using Taguchi and grey analysis. International Journal Produc-tivity and Quality Management, 16(2), 148-168.
Bhandari, S., & Shukla, N. (2015). Parametric optimization of electrochemical grinding operation by par-ticle swarm optimization technique. SSRG International Journal of Mechanical Engineering, 2(4), 1-6.
Bharti, P.S., Maheshwari, S., & Sharma, C. (2012). Multi-objective optimization of electric-discharge ma-chining process using controlled elitist NSGA-II. Journal of Mechanical Science and Technology, 26(6), 1875-1883.
Bhattacharyya, B., Munda, J., & Malapati, M. (2004). Advancement in electrochemical micro-machining. International Journal of Machine Tools & Manufacture, 44(15), 1577-1589.
Bhavsar, S. N., Aravindan, S., & Rao, P. V. (2015). Investigating material removal rate and surface roughness using multi-objective optimization for focused ion beam (FIB) micro-milling of cemented carbide. Precision Engineering, 40, 131-138.
Bhuyan, B. K., & Yadava, V. (2013a). Experimental modeling and multi-objective optimization of travel-ing wire electrochemical spark machining (TW-ECSM) process. Journal of Mechanical Science and Technology, 27(8), 2467-2476.
Bhuyan, B. K., & Yadava, V. (2013b). Simultaneous optimization of multiple quality characteristics in travelling wire electrochemical spark machining of pyrex glass. Asian Journal of Engineering and Applied Technology, 2(2), 19-24.
Bhuyan, B. K., & Yadava, V. (2014a). Experimental modelling and multi-response optimization of travel-ling wire electrochemical spark machining of pyrex glass. Proceedings of the Institution of Mechani-cal Engineers, Part B: Journal of Engineering Manufacture, 228(8), 902-916.
Bhuyan, B. K., & Yadava, V. (2014b). Modelling and optimisation of travelling wire electro-chemical spark machining process. International Journal of Industrial and Systems Engineering, 18(2), 139-158.
Boopathi, S., & Sivakumar, K. (2013). Experimental investigation and parameter optimization of near-dry wire-cut electrical discharge machining using multi-objective evolutionary algorithm. International Journal of Advanced Manufacturing Technology, 67(9-12), 2639-2655.
Boopathi, S., & Sivakumar, K. (2016). Optimal parameter prediction of oxygen-mist near-dry wire-cut EDM. International Journal of Manufacturing Technology and Management, 30(3-4), 164-178.
Bose, G.K., & Mitra, S. (2013). Study of ECG process while machining Al2O3/Al-IPC using grey-Taguchi methodology. Advances in Production Engineering & Management, 8(1), 41-51.
Chakravorty, R., Gauri S.K., & Chakraborty, S. (2012). Optimization of correlated responses of EDM process. Journal of Materials and Manufacturing Processes, 27(3), 337-347.
Chakravorty, R., Gauri, S., & Chakraborty, S. (2013). Optimization of multiple responses of ultrasonic machining (USM) process: A comparative study. International Journal of Industrial Engineering Computations, 4(2), 285-296.
Chalisgaonkar, R., & Kumar, J. (2013). Optimization of WEDM process of pure titanium with multiple performance characteristics using Taguchi’s DOE approach and utility concept. Frontiers of Mechani-cal Engineering, 8(2), 201-214.
Cheema, M. S., Dvivedi, A., & Sharma, A. K. (2013). A hybrid approach to multi-criteria optimization based on user’s preference rating. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(11), 1733-1742.
Das, S., Doloi, B., & Bhattacharyya, B. (2013). Optimisation of ultrasonic machining of zirconia bio-ceramics using genetic algorithm. International Journal of Manufacturing Technology and Manage-ment, 27(4-6), 186-197.
Dave, H.K., Desai, K.P., & Raval, H.K. (2012). Optimisation of multiple response characteristics in orbital electro discharge machining of Inconel 718 using Taguchi’s loss function. International Journal of Manufacturing Technology and Management, 25(1-3), 78-94.
Dewangan, S., & Biswas, C.K. (2013). Optimisation of machining parameters using grey relation analysis for EDM with impulse flushing. International Journal Mechatronics and Manufacturing Systems, 6(2), 144-158.
Dewangan, S., Gangopadhyay, S., & Biswas, C.K. (2015). Multi-response optimization of surface integri-ty characteristics of EDM process using grey-fuzzy logic-based hybrid approach. International Journal of Engineering Science and Technology, 18(3), 361-368.
Dhobe, S.H., Doloi, B. & Bhattacharya B. (2014). Optimisation of ECM process during machining of tita-nium using quality loss function. International Journal of Manufacturing Technology and Manage-ment, 28(1-3), 19-38.
Dubey, A.K., & Yadava, V. (2008). Laser beam machining - A review. International Journal of Machine Tools & Manufacture, 48(6), 609-628.
El-Hofy, H. (2005). Advanced machining processes : Nontraditional and hybrid machining processes. McGraw-Hill, New York.
Ganguly, D., Acherjee, B., Kuar, A. S., & Mitra, S. (2012). Hole characteristics optimization in Nd: YAG laser micro-drilling of zirconium oxide by grey relation analysis. International Journal of Advanced Manufacturing Technology, 61(9-12), 1255-1262.
Garg, M.P., Jain, A., & Bhushan, G. (2012). Modelling and multi-objective optimization of process pa-rameters of wire electrical discharge machining using non-dominated sorting genetic algorithm-II. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufac-ture, 226(12), 1986-2001.
Golshan, A., Gohari, S., & Ayob, A. (2012). Multi-objective optimisation of electrical discharge machin-ing of metal matrix composite Al/SiC using non-dominated sorting genetic algorithm. International Journal of Mechatronics and Manufacturing Systems, 5(5-6), 385-398.
Gopal, A. & Chakradhar, D. (2012). Parametric optimization in electrochemical machining of EN31 steel based on grey relation approach. International Journal of Applied Mechanics and Material, 110, 1649-1656.
Goswami, R. N., Mitra, S., & Sarkar, S. (2009). Experimental investigation on electrochemical grinding (ECG) of alumina-aluminum interpenetrating phase composite. International Journal of Advanced Manufacturing Technology, 40(7), 729-741.
Goswami, D., & Chakraborty, S. (2015). Parametric optimization of ultrasonic machining process using gravitational search and fireworks algorithms. Ain Shams Engineering Journal, 6(1), 315-331.
Ho, K.H., & Newman, S.T. (2003). State of the art electrical discharge machining (EDM). International Journal of Machine Tools & Manufacture, 43(13), 1287-1300.
Ho, K.H., Newman, S.T., Rahimifard, S., & Allen, R.D. (2004). State of the art in wire electrical discharge machining (WEDM). International Journal of Machine Tools & Manufacture, 44(12-13), 1247-1259.
Jagadish., & Ray, A. (2015). Multi-objective optimization of green EDM: An integrated theory. Journal of the Institution of Engineers (India): Series C, 96(1), 41-47.
Janković, P., Igić, T., & Nikodijević, D. (2012). Process parameters effect on material removal mecha-nism and cut quality of abrasive water jet machining. Theoretical and Applied Mechanics, 40(S1), 277-291.
Jayadithya, R., Deekshith, B., Chaithnya, P.L., & Rajyalakshmi, G. (2014). Multi objective optimization of WEDM through Taguchi method and utility concept. International Journal of Science and Applied Information Technology, 3(4), 1-6.
Jegan, T.C.M., Ravindran, D., Dev Anand, M., & Rohit, I.J. (2013). ECM parameters modeling and opti-mization using WSGA. Applied Mechanics and Materials, 423-426, 925-930.
Kalaimathi, M., Venkatachalam, G., & Sivakumar, M. (2014). Experimental investigations on the electro-chemical machining characteristics of monel 400 alloys and optimization of process parameters. Jor-dan Journal of Mechanical and Industrial Engineering, 8(3), 143-151.
Kanish, T.C., Kuppan, P., Narayanan, S., & Ashok, S.D. (2014). A fuzzy logic based model to predict the improvement in surface roughness in magnetic field assisted abrasive finishing. Procedia Engineer-ing, 97, 1948-1956.
Kataria, R., Kumar, J., & Pabla, B.S. (2016). Experimental investigation and optimization of machining characteristics in ultrasonic machining of WC-Co composite using GRA method. Materials and Manu-facturing Processes, 31(5), 685-693.
Kibria, G., Doloi, B., & Bhattacharyya, B. (2013). Experimental investigation and multi-objective optimi-zation of Nd: YAG laser micro-turning process of alumina ceramic using orthogonal array and grey re-lational analysis. Optics & Laser Technology, 48, 16-27.
Kovačević, M., Madić, M., Radovanović, M., & Rančić, D. (2014). Software prototype for solving multi-objective machining optimization problems: Application in non-traditional machining processes. Ex-pert Systems with Applications, 41(13), 5657-5668.
Krishnan, S.A., & Samuel, G.L. (2013). Multi-objective optimization of material removal rate and surface roughness in wire electrical discharge turning. International Journal of Advanced Manufacturing Technology, 67(9-12), 2021-2032.
Kuar, A.S., Acherjee, B., Ganguly, D., & Mitra, S. (2012). Optimization of Nd: YAG laser parameters for microdrilling of alumina with multiquality characteristics via grey-Taguchi method. Materials and Manufacturing Processes, 27(3), 329-336.
Kuila, S. K., & Bose, G. K. (2015). Process parameters optimization of aluminium by grey-Taguchi meth-odology during AWJM process. International Journal of Innovation Research in Science, Engineering and Technology, 4(9), 124-131.
Kumar, K., & Agarwal, S. (2012). Multi-objective parametric optimization on machining with wire electric discharge machining. International Journal of Advanced Manufacturing Technology, 62(5-8), 617-633.
Kumar, H., Singh, S., & Kumar, P. (2013). Magnetic abrasive finishing - A review. International Journal of Engineering Research & Technology, 2(3), 1-9.
Kumar, J. (2014). Investigations into the surface quality and micro-hardness in the ultrasonic machining of titanium (ASTM GRADE-1). Journal of the Brazilian Society of Mechanical Sciences and Engineer-ing, 36(4), 807-823.
Kuriachen, B., Somashekhar, K.P., & Mathew, J. (2015). Multiresponse optimization of micro-wire elec-trical discharge machining process. International Journal of Advanced Manufacturing Technolo-gy, 76(1-4), 91-104.
Madic, M., Petkovic, D., & Radovanovic, M. (2014). GRA approach for multi-objective optimization of laser cutting. UPB Scientific Bulletin, Series B: Chemical and Material Science, 76(3), 169-180.
Madic, M., Radovanovic, M., Trajanovic, M., & Manic, M. (2015). Multi objective optimization of laser cutting using cuckoo search algorithm. Journal of Engineering Science and Technology, 10(3), 353-363.
Majumder, A. (2012). Parametric optimization of electric discharge machining by GA-based response sur-face methodology. Journal for Manufacturing Science and Production, 12(1), 25-30.
Majumder, A. (2013). Process parameter optimization during EDM of AISI 316 LN stainless steel by using fuzzy based multi-objective PSO. Journal of Mechanical Science and Technology, 27(7), 2143-2151.
Majumder, A., Das P.K., Majumder, A., & Debnath, M. (2014). An approach to optimize the EDM pro-cess parameters using desirability-based multi-objective PSO. Journal of Production and Manufactur-ing Research, 2(1), 228-240.
Majumder, A. (2015). Comparative study of three evolutionary algorithms coupled with neural network model for optimization of electric discharge machining process parameters. Proceedings of the Institu-tion of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(9), 1504-1516.
Malik, A., & Manna, A. (2017). Travelling wire electrochemical spark machining: An overview. In: Non-traditional micromachining processes. Eds. Kibria, G., Bhattacharyya, B., & Davim, J.P., Springer In-ternational Publishing.
Manikandan, N., Kumanan, S., & Sathiyanarayanan, C. (2015). Multi-response optimization of titanium Ti-6Al-4V alloy using Taguchi based grey relational analysis. Indian Journal of Engineering and Ma-terial Sciences, 22(2), 153-160.
Mediliyegedara, T.K.K.R., De Silva, A.K.M., Harrison, D.K., & McGeough, J.A. (2005). New develop-ments in the process control of the hybrid electro chemical discharge machining (ECDM) process. Journal of Materials Processing Technology, 167(2-3), 338-343.
Meijer, J. (2004). Laser beam machining (LBM), state of the art and new opportunities. Journal of Mate-rials Processing Technology, 149(1-3), 2-17.
Ming, W., Zhang, Z., Zhang, G., Huang, Y., Guo, J., & Chen, Y. (2014). Multi-objective optimization of 3D-surface topography of machining YG15 in WEDM. Materials and Manufacturing Process-es, 29(5), 514-525.
Ming, W., Ma, J., Zhang, Z., Huang, H., Shen, D., Zhang, G., & Huang, Y. (2016). Soft computing models and intelligent optimization system in electro-discharge machining of SiC/Al composites. International Journal of Advanced Manufacturing Technology, 87(1), 201-217.
Mishra, S., & Yadava, V. (2013a). Modeling and optimization of laser beam percussion drilling of nickel-based superalloy sheet using Nd: YAG laser. Optics and Lasers in Engineering, 51(6), 681-695.
Mishra, S., & Yadava, V. (2013b). Modeling and optimization of laser beam percussion drilling of thin al-uminium sheet. Optics & Laser Technology, 48, 461-474.
Moghaddam, M.A., Kolahan, F. (2015). Optimization of EDM process parameters using statistical analysis and simulated annealing algorithm. International Journal of Engineering, 28(1), 154-163.
Mohamad, A., Zain, A. M., Bazin, N. E. N., & Udin, A. (2015). A process prediction model based on cuckoo algorithm for abrasive waterjet machining. Journal of Intelligent Manufacturing, 26(6), 1247-1252.
Mohanty, C.P., Mahapatra, S.S., & Sahu, J. (2016a). Parametric optimisation of electrical discharge ma-chining process: A numerical approach. International Journal of Industrial and Systems Engineering, 22(2), 207-244.
Mohanty, C.P., Mahapatra, S.S., & Singh, M.R. (2016b). A particle swarm approach for multi-objective optimization of electrical discharge machining process. Journal of Intelligent Manufacturing, 27(6), 1171-1190.
Moosa, A. A. (2013). Utilizing a magnetic abrasive finishing technique (MAF) via adaptive neuro fuzzy (ANFIS). American Journal of Materials Engineering and Technology, 1(3), 49-53.
Mukherjee, R., & Chakraborty, S. (2012). Selection of EDM process parameters using biogeography-based optimization algorithm. Journal of Materials and Manufacturing Processes, 27(9), 954-962.
Mukherjee, R., Chakraborty, S., & Samanta, S. (2012). Selection of wire electrical discharge machining process parameters using non-traditional optimization algorithms. Applied Soft Computing, 12(8), 2506-2516.
Mukherjee, R., & Chakraborty, S. (2013). Selection of the optimal electrochemical machining process pa-rameters using biogeography-based optimization algorithm. International Journal of Advanced Manu-facturing and Technology, 64(5), 781-791.
Mukherjee, R., Goswami, D., & Chakraborty, S. (2013). Parametric optimization of Nd: YAG laser beam machining process using artificial bee colony algorithm. Journal of Industrial Engineer-ing, http://dx.doi.org/10.1155/2013/570250.
Nayak, B.B., & Mahapatra, S.S. (2014). A utility concept approach for multi-objective optimization of ta-per cutting operation using WEDM. Procedia Engineering, 97, 469-478.
Nayak, B.B., & Mahapatra, S.S. (2016). Optimization of WEDM process parameters using deep cryo-treated inconel 718 as work material. International Journal of Engineering Science and Technology, 19(1), 161-170.
Padhee, S., Nayak, N., Panda, S.K., Dhal, P.R., & Mahapatra, S.S. (2012). Multi-objective parametric op-timization of powder mixed electro-discharge machining using response surface methodology and non-dominated sorting genetic algorithm. Proceedings of Indian Academy of Sciences (Sadhana), 32(2), 223-240.
Panda, M. C., & Yadava, V. (2012). Intelligent modeling and multiobjective optimization of die sinking electrochemical spark machining process. Materials and Manufacturing Processes, 27(1), 10-25.
Panda, S., Mishra, D, Biswal, B.B., & Nanda, P. (2015). Optimization of multiple response characteristics of EDM process using Taguchi-based grey relational analysis and modified PSO. Journal of Advanced Manufacturing Systems, 14(3), 123-148.
Pandey, A. K., & Dubey, A. K. (2012a). Simultaneous optimization of multiple quality characteristics in laser cutting of titanium alloy sheet. Optics & Laser Technology, 44(6), 1858-1865.
Pandey, A. K., & Dubey, A. K. (2012b). Taguchi based fuzzy logic optimization of multiple quality char-acteristics in laser cutting of Duralumin sheet. Optics and Lasers in Engineering, 50(3), 328-335.
Pandey, A. K., & Dubey, A. K. (2013). Multiple quality optimization in laser cutting of difficult-to-laser-cut material using grey-fuzzy methodology. International Journal of Advanced Manufacturing Tech-nology, 65(1-4), 421-431.
Paul, L., & Hiremath, S. S. (2014). Evaluation of process parameters of ECDM using grey relational anal-ysis. Procedia Materials Science, 5, 2273-2282.
Pawar, P. J., & Rao, R. V. (2013). Parameter optimization of machining processes using teaching-learning-based optimization algorithm. International Journal of Advanced Manufacturing Technology, 67(5-8), 995-1006.
Pawar, P. J., & Rayate, G. B. (2014). Multi-objective optimization of laser beam machining process pa-rameters. International Journal of Advanced Mechanical Engineering, 4(3), 257-262.
Phipon, R., & Pradhan, B. B. (2012a). Control parameters optimization of laser beam machining using ge-netic algorithm. International Journal of Computational Engineering Research, 2(5), 1510-1516.
Phipon, R., & Pradhan, B. B. (2012b). Optimization of electro-chemical discharge machining process us-ing genetic algorithm. IOSR Journal of Engineering, 2(9), 106-115.
Porwal, R.K., Yadava, R.K., & Ramkumar, J. (2012). Artificial neural network modelling and multi-objective optimisation of hole drilling electro discharge micro machining of invar. International Jour-nal of Mechatronics and Manufacturing Systems, 5(5-6), 470-492.
Pradhan, M. K. (2012). Determination of optimal parameters with multi-response characteristics of EDM by response surface methodology, grey relational analysis and principal component analysis. Interna-tional Journal of Manufacturing Technology and Management, 26(1-4), 56-80.
Prasad, D.V.S.S.S.V., & Krishna, A.G. (2015). Empirical modelling and optimization of kerf and wire wear ratio in wire electrical discharge machining. International Journal of Advanced Manufacturing Technology, 77(1-4), 427-441.
Priyadarshini, M., & Pal, K. (2016). Multi-objective optimisation of EDM process using hybrid Taguchi-based methodologies for Ti-6Al-4V alloy. International Journal of Manufacturing Research, 11(2), 144-166.
Puri, A. B., & Banerjee, S. (2013). Multiple-response optimisation of electrochemical grinding characteris-tics through response surface methodology. International Journal of Advanced Manufacturing Tech-nology, 64(5-8), 715-725.
Radhika, N., Chandran, G.K., Shivaram, P., & Karthik, K.T. (2015). Multi-objective optimization of EDM parameters using grey relation analysis. Journal of Engineering Science and Technology, 10(1), 1-11.
Raja, S. B., Pramod C.V. K., Krishna, K. V., Ragunathan, A., & Vinesh, S. (2015). Optimization of elec-trical discharge machining parameters on hardened die steel using firefly algorithm. Journal of Engi-neering with Computers, 31(1), 1-9.
Rajurkar, K.P., Zhu, D., McGeough, J.A., Kozak, J., & De Silva, A. (1999). New developments in electro-chemical machining. Annals of the ClRP, 48(2), 567-579.
Rajyalakshmi, G., & Ramaiah, P.V. (2013). Multiple process parameter optimization of wire electrical dis-charge machining on Inconel 825 using Taguchi grey relational analysis. International Journal of Ad-vanced Manufacturing Technology, 69(5-8), 1249-1262.
Rao, P.S., Ramji, K., & Satyanarayana, B. (2014). Experimental investigation and optimization of wire EDM parameters for surface roughness, MRR and white layer in machining of aluminium al-loy. Procedia Materials Science, 5, 2197-2206.
Rao, T.B., & Krishna, A.G. (2014). Selection of optimal process parameters in WEDM while machining Al7075/SiCp metal matrix composites. International Journal of Advanced Manufacturing Technolo-gy, 73(1-4), 299-314.
Rao, S.M., & Padmanabham, G. (2015). Parametric optimization in electrochemical machining using utili-ty based Taguchi method. Journal of Engineering Science and Technology, 10(1), 81-96.
Rathod, P., Aravindan, S., & Rao, P. V. (2015). Parametric optimization during dry machining of titanium alloy (Ti6Al4V) with innovative textured tools for optimum product quality. International Journal of Engineering Development and Research, 4(3), 1067-1074.
Saha, A., & Mondal, S.C. (2016). Multi-objective optimization in WEDM process of nanostructured hard-facing materials through hybrid techniques. Measurement, 94, 46-59.
Saha, P., Tarafdar, D., Pal, S. K., Saha, P., Srivastava, A.K., & Das, K. (2013). Multi-objective optimiza-tion in wire-electro-discharge machining of TiC reinforced composite through neuro-genetic tech-nique. Applied Soft Computing, 13(4), 2065-2074.
Sahu, S.N., & Nayak, N.C. (2015). Multi-objective optimization of EDM process: RSM modelling and ge-netic algorithm approach. Journal of Production Engineering, 18(2), 29-32.
Sathisha, N., Hiremath, S. S., & Shivakumar, J. (2014). Prediction of material removal rate using regres-sion analysis and artificial neural network of ECDM process. International Journal of Recent Advances in Mechanical Engineering, 3(2), 69-81.
Sathiyamoorthy, V., Sekar, T., & Elango, N. (2015). Optimization of processing parameters in ECM of die tool steel using nanofluid by multi-objective genetic algorithm. The Scientific World Journal, http://dx.doi.org/10.1155/2015/895696.
Sathiyamoorthy, V., & Sekar, T. (2016). Optimisation of processing parameters in ECM of AISI 202 using multi objective genetic algorithm. International Journal of Enterprise Network Management, 7(2), 133-141.
Satyanarayana, B., & Srikar, G. (2014). Optimization of abrasive water jet machining process parameters using Taguchi grey relational analysis. International Journal of Mechanical and Production Engineer-ing, 2(9), 82-87.
Senthilkumar, C., Ganesan, G., & Karthikeyan, R. (2013). Influence of input parameters on characteristics of electro chemical machining process. International Journal of Applied Science and Engineering, 11(1), 13-24.
Shahali, H., Yazdi, M.R.S., Mohammadi, A., &Iimanian, E. (2012). Optimization of surface roughness and thickness of white layer in wire electrical discharge machining of DIN 1.4542 stainless steel using micro-genetic algorithm and signal to noise ratio techniques. Proceedings of the Institution of Mechani-cal Engineers, Part B: Journal of Engineering Manufacture, 226(5), 803-812.
Sharma, A., & Yadava, V. (2012). Modelling and optimization of cut quality during pulsed Nd: YAG laser cutting of thin Al-alloy sheet for straight profile. Optics & Laser Technology, 44(1), 159-168.
Sharma, A., & Yadava, V. (2013). Modelling and optimization of cut quality during pulsed Nd: YAG laser cutting of thin Al-alloy sheet for curved profile. Optics and Lasers in Engineering, 51(1), 77-88.
Shayan, A.V., Afza, R.A., & Teimouri, R. (2013). Parametric study along with selection of optimal solu-tions in dry wire cut machining of cemented tungsten carbide (WC-Co). Journal of Manufacturing Processes, 15(4), 644-658.
Shukla, A., & Singh, D. K. (2013). Modelling and optimization of magnetic abrasive finishing process. In-ternational Journal of Engineering Research and Technology, 2(9), 1471-1478.
Singh, S. (2012). Optimization of machining characteristics in electric discharge machining of 6061Al/Al2O3p/20P composites by grey relational analysis. International Journal of Advanced Manu-facturing Technology, 63(9), 1191-1202.
Singh, G. K., Yadava, V., & Kumar, R. (2012). Modelling and optimisation of electro-discharge diamond face grinding of cemented carbide-cobalt composite. International Journal of Industrial and Systems Engineering, 12(2), 141-164.
Singh, R., Walia, R. S., & Suri, N. M. (2015). Parametric optimization of centrifugal-magnetic force assist-ed abrasive flow machining process using utility concept. International Journal of Research in Engi-neering and Technology, 4(8), 382-388.
Singh, D., & Shukla, R. S. (2016). Optimisation of electrochemical micromachining and electrochemical discharge machining process parameters using firefly algorithm. International. Journal of Mechatron-ics and Manufacturing Systems, 9(2), 137-159.
Sohrabpoor, H., Khanghah, S.P., Shahraki, S., & Teimouri, R. (2016). Multi-objective optimization of electrochemical machining process. International Journal of Advanced Manufacturing Technology, 82(9), 1683-1692.
Solaiyappan, A., Kalaimathi, M., & Venkatachalam, G. (2014). Multi-objective optimization of process parameters for electrochemical machining of 6061Al/10%Wt Al2O3/5%Wt SiC composite using hybrid fuzzy-artificial bee colony algorithm. Jordan Journal of Mechanical and Industrial Engineering, 8(5), 323-331.
Somashekhar, K.P., Mathew, J., & Ramachandran, N. (2012). A feasibility approach by simulated anneal-ing on optimization of micro-wire electric discharge machining parameters. International Journal of Advanced Manufacturing Technology, 61(9-12), 1209-1213.
Subrahmanyam, S.V., & Sarcar, M.M.M. (2013). Evaluation of optimal parameters for machining with wire cut EDM using Grey-Taguchi method. International Journal of Scientific and Research Publica-tions, 3(3), 1-9.
Sundaram, M. M. (2014). Hybrid machining processes. In Nee, A.Y.C. (Ed.) Handbook of Manufacturing Engineering and Technology, 1109-1126.
Tamrin, K. F., Nukman, Y., Choudhury, I. A., & Shirley, S. (2015). Multiple-objective optimization in precision laser cutting of different thermoplastics. Optics and Lasers in Engineering, 67, 57-65.
Tang, L., & Yang, S. (2013). Experimental investigation on the electrochemical machining of 00Cr12Ni9Mo4Cu2 material and multi-objective parameters optimization. International Journal of Advanced Manufacturing Technology, 67(9), 2909-2916.
Tang, L., & Du, Y.T. (2014). Multi-objective optimization of green electrical discharge machining Ti-6Al-4V in tap water via grey-Taguchi method. Journal of Materials and Manufacturing Processes, 29(5), 507-513.
Teimouri, R., & Baseri, H. (2012). Improvement of dry EDM process characteristics using artificial soft computing methodologies. Journal of Production Engineering Research and Development, 6(4), 493-504.
Teimouri, R., & Baseri, H. (2013). Artificial evolutionary approaches to produce smoother surface in magnetic abrasive finishing of hardened AISI 52100 steel. Journal of Mechanical Science and Tech-nology, 27(2), 533-539.
Teimouri, R., & Baseri, H. (2014). Optimization of magnetic field assisted EDM using the continuous ACO algorithm. Applied Soft Computing, 14, 381-389.
Teimoiri, R., & Shorabpoor, H. (2013). Application of adaptive neuro-fuzzy inference system and cuckoo optimization algorithm for analyzing electrochemical machining process. Frontiers of Mechanical En-gineering, 8(4), 429-442.
Teimouri, R., Baseri, H., & Moharami, R. (2015). Multi-responses optimization of ultrasonic machining process. Journal of Intelligent Manufacturing, 26(4), 745-753.
Teixidor, D., Ferrer, I., Ciurana, J., & Ozel, T. (2013). Optimization of process parameters for pulsed laser milling of micro-channels on AISI H13 tool steel. Robotics and Computer-Integrated Manufactur-ing, 29(1), 209-218.
Thangadurai, K.R., & Asha, A. (2014). Parametric optimization of EDM process of aluminium boron car-bide composite using desirability function approach and genetic algorithm. Journal of Applied Me-chanics and Materials, 592-594, 684-688.
Thoe, T.B., Aspinwall, D.K., & Wise, M.L.H. (1998). Review on ultrasonic machining. International Journal of Machine Tools & Manufacture, 38(4), 239-255.
Uyyala, S.B., & Kumar, A. (2014). Performance analysis of electrical discharge machining parameters on RENE 80 nickel super alloy using statistical tools. International Journal of Machining and Machinabil-ity of Materials, 15(3-4), 212-234.
Varun, S., Rajyalakshmi, G., Reddy, B.B., & Reddy, R.R.V.V. (2016). Modelling and multi objective op-timization of WEDM of commercially monel super alloy using evolutionary algorithms. IOP Confer-ence Series: Materials Science and Engineering, 149(1), 1-15.
Yadav, R. N., Yadava, V., & Singh, G.K. (2012). Intelligent modeling of electro-discharge diamond face grinding (EDDFG). International Journal of Surface Engineering & Materials Technology, 2(2), 24-28.
Yadav, R. N., & Yadava, V. (2015). Application of soft computing techniques for modelling and optimi-zation of slotted-electrical discharge diamond face grinding process. Transactions of the Indian Insti-tute of Metals, 68(5), 981-990.
Yadav, R. N., Yadava, V., & Singh, G. K. (2013). Multi-objective optimization of process parameters in electro-discharge diamond face grinding based on ANN-NSGA-II hybrid technique. Frontiers of Me-chanical Engineering, 8(3), 319-332.
Yadav, R. N., Yadava, V., & Singh, G. K. (2014a). Application of non-dominated sorting genetic algo-rithm for multi-objective optimization of electrical discharge diamond face grinding process. Journal of Mechanical Science and Technology, 28(6), 2299-2306.
Yadav, R. N., Yadava, V., & Singh, G. K. (2014b). Application of response surface methodology and ge-netic algorithm for optimisation of electro-discharge diamond face grinding of tungsten carbide-cobalt composite. International Journal of Industrial and Systems Engineering, 18(1), 76-94.
Yadav, U.S., & Yadava, V. (2015). Experimental modelling and optimisation of process parameters of hole drilling by electrical discharge machining of aerospace titanium alloy. International Journal of Manufacturing Technology and Management, 29(3-4), 211-234.
Yang, R.T., Tzeng, C.J., Yang, Y.K., & Hsieh, M.H. (2012). Optimization of wire electrical discharge ma-chining process parameters for cutting tungsten. International Journal of Advanced Manufacturing Technology, 60(1-4), 135-147.
Yusup, N., Sarkheyli, A., Zain, A. M., Hashim, S. Z. M., & Ithnin, N. (2014). Estimation of optimal ma-chining control parameters using artificial bee colony. Journal of Intelligent Manufacturing, 25(6), 1463-1472.
Zhang, G., Zhang, Z., Ming, W., Guo, J., Huang, Y., & Shao, X. (2014). The multi-objective optimization of medium-speed WEDM process parameters for machining SKD11 steel by the hybrid method of RSM and NSGA-II. International Journal of Advanced Manufacturing Technology, 70(9), 2097-2109.
Acherjee, B., Prakash, S., Kuar, A. S., & Mitra, S. (2014). Grey relational analysis based optimization of underwater Nd: YAG laser micro-channeling on PMMA. Procedia Engineering, 97, 1406-1415.
Aggarwal, V., Khangura, S.S., & Garg, R.K. (2015). Parametric modeling and optimization for wire elec-trical discharge machining of Inconel 718 using response surface methodology. International Journal of Advanced Manufacturing Technology, 79(1-4), 31-47.
Aich, U., Banerjee, S., Bandyopadhyay, A., & Das, P. K. (2014). Multi-objective optimisation of abrasive water jet machining responses by simulated annealing and particle swarm. International Journal of Mechatronics and Manufacturing Systems, 7(1), 38-59.
Aich, U., & Banerjee, S. (2016). Application of teaching learning based optimization procedure for the development of SVM learned EDM process and its pseudo Pareto optimization. Applied Soft Compu-ting, 39, 64-83.
Anitha, J., Das, R., & Pradhan, M. K. (2016). Multi-objective optimization of electrical discharge machin-ing processes using artificial neural network. Jordan Journal of Mechanical and Industrial Engineer-ing, 10(1), 11-18.
Aultrin, K. J., & Anand, M.D. (2016). Multi-objective optimization of abrasive water jet machining of al-uminium 6061 alloy by grey relational analysis. Journal of Chemical and Pharmaceutical Sciences. 9(1), 410-417.
Aultrin, K. J., Anand, M.D., & Jose, P. (2012). Modelling the cutting process and cutting performance in abrasive water jet machining using genetic-fuzzy approach. Procedia Engineering, 38, 4013-4020.
Ay, M., Çaydaş, U., & Hascalik, A. (2013). Optimization of micro-EDM drilling of inconel 718 super al-loy. International Journal of Advanced Manufacturing Technology, 66(5), 1015-1023.
Azhiri, R.B., Teimouri, R., Baboly, M.G., & Leseman, Z. (2014). Application of Taguchi, ANFIS and grey relational analysis for studying, modelling and optimization of wire EDM process while using gaseous media. International Journal of Advanced Manufacturing Technology, 71(1-4), 279-295.
Baraskar, S.S., Banwait, S.S., & Laroiya, S.C. (2013). Multi-objective optimization of electrical discharge machining process using a hybrid method. Journal of Materials and Manufacturing Processes, 28(4), 348-354.
Behera, S., Satapathy, S., & Ghadai, S.K. (2015). Parameter optimisation of powder mixed EDM of alu-minium-based metal matrix composite using Taguchi and grey analysis. International Journal Produc-tivity and Quality Management, 16(2), 148-168.
Bhandari, S., & Shukla, N. (2015). Parametric optimization of electrochemical grinding operation by par-ticle swarm optimization technique. SSRG International Journal of Mechanical Engineering, 2(4), 1-6.
Bharti, P.S., Maheshwari, S., & Sharma, C. (2012). Multi-objective optimization of electric-discharge ma-chining process using controlled elitist NSGA-II. Journal of Mechanical Science and Technology, 26(6), 1875-1883.
Bhattacharyya, B., Munda, J., & Malapati, M. (2004). Advancement in electrochemical micro-machining. International Journal of Machine Tools & Manufacture, 44(15), 1577-1589.
Bhavsar, S. N., Aravindan, S., & Rao, P. V. (2015). Investigating material removal rate and surface roughness using multi-objective optimization for focused ion beam (FIB) micro-milling of cemented carbide. Precision Engineering, 40, 131-138.
Bhuyan, B. K., & Yadava, V. (2013a). Experimental modeling and multi-objective optimization of travel-ing wire electrochemical spark machining (TW-ECSM) process. Journal of Mechanical Science and Technology, 27(8), 2467-2476.
Bhuyan, B. K., & Yadava, V. (2013b). Simultaneous optimization of multiple quality characteristics in travelling wire electrochemical spark machining of pyrex glass. Asian Journal of Engineering and Applied Technology, 2(2), 19-24.
Bhuyan, B. K., & Yadava, V. (2014a). Experimental modelling and multi-response optimization of travel-ling wire electrochemical spark machining of pyrex glass. Proceedings of the Institution of Mechani-cal Engineers, Part B: Journal of Engineering Manufacture, 228(8), 902-916.
Bhuyan, B. K., & Yadava, V. (2014b). Modelling and optimisation of travelling wire electro-chemical spark machining process. International Journal of Industrial and Systems Engineering, 18(2), 139-158.
Boopathi, S., & Sivakumar, K. (2013). Experimental investigation and parameter optimization of near-dry wire-cut electrical discharge machining using multi-objective evolutionary algorithm. International Journal of Advanced Manufacturing Technology, 67(9-12), 2639-2655.
Boopathi, S., & Sivakumar, K. (2016). Optimal parameter prediction of oxygen-mist near-dry wire-cut EDM. International Journal of Manufacturing Technology and Management, 30(3-4), 164-178.
Bose, G.K., & Mitra, S. (2013). Study of ECG process while machining Al2O3/Al-IPC using grey-Taguchi methodology. Advances in Production Engineering & Management, 8(1), 41-51.
Chakravorty, R., Gauri S.K., & Chakraborty, S. (2012). Optimization of correlated responses of EDM process. Journal of Materials and Manufacturing Processes, 27(3), 337-347.
Chakravorty, R., Gauri, S., & Chakraborty, S. (2013). Optimization of multiple responses of ultrasonic machining (USM) process: A comparative study. International Journal of Industrial Engineering Computations, 4(2), 285-296.
Chalisgaonkar, R., & Kumar, J. (2013). Optimization of WEDM process of pure titanium with multiple performance characteristics using Taguchi’s DOE approach and utility concept. Frontiers of Mechani-cal Engineering, 8(2), 201-214.
Cheema, M. S., Dvivedi, A., & Sharma, A. K. (2013). A hybrid approach to multi-criteria optimization based on user’s preference rating. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(11), 1733-1742.
Das, S., Doloi, B., & Bhattacharyya, B. (2013). Optimisation of ultrasonic machining of zirconia bio-ceramics using genetic algorithm. International Journal of Manufacturing Technology and Manage-ment, 27(4-6), 186-197.
Dave, H.K., Desai, K.P., & Raval, H.K. (2012). Optimisation of multiple response characteristics in orbital electro discharge machining of Inconel 718 using Taguchi’s loss function. International Journal of Manufacturing Technology and Management, 25(1-3), 78-94.
Dewangan, S., & Biswas, C.K. (2013). Optimisation of machining parameters using grey relation analysis for EDM with impulse flushing. International Journal Mechatronics and Manufacturing Systems, 6(2), 144-158.
Dewangan, S., Gangopadhyay, S., & Biswas, C.K. (2015). Multi-response optimization of surface integri-ty characteristics of EDM process using grey-fuzzy logic-based hybrid approach. International Journal of Engineering Science and Technology, 18(3), 361-368.
Dhobe, S.H., Doloi, B. & Bhattacharya B. (2014). Optimisation of ECM process during machining of tita-nium using quality loss function. International Journal of Manufacturing Technology and Manage-ment, 28(1-3), 19-38.
Dubey, A.K., & Yadava, V. (2008). Laser beam machining - A review. International Journal of Machine Tools & Manufacture, 48(6), 609-628.
El-Hofy, H. (2005). Advanced machining processes : Nontraditional and hybrid machining processes. McGraw-Hill, New York.
Ganguly, D., Acherjee, B., Kuar, A. S., & Mitra, S. (2012). Hole characteristics optimization in Nd: YAG laser micro-drilling of zirconium oxide by grey relation analysis. International Journal of Advanced Manufacturing Technology, 61(9-12), 1255-1262.
Garg, M.P., Jain, A., & Bhushan, G. (2012). Modelling and multi-objective optimization of process pa-rameters of wire electrical discharge machining using non-dominated sorting genetic algorithm-II. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufac-ture, 226(12), 1986-2001.
Golshan, A., Gohari, S., & Ayob, A. (2012). Multi-objective optimisation of electrical discharge machin-ing of metal matrix composite Al/SiC using non-dominated sorting genetic algorithm. International Journal of Mechatronics and Manufacturing Systems, 5(5-6), 385-398.
Gopal, A. & Chakradhar, D. (2012). Parametric optimization in electrochemical machining of EN31 steel based on grey relation approach. International Journal of Applied Mechanics and Material, 110, 1649-1656.
Goswami, R. N., Mitra, S., & Sarkar, S. (2009). Experimental investigation on electrochemical grinding (ECG) of alumina-aluminum interpenetrating phase composite. International Journal of Advanced Manufacturing Technology, 40(7), 729-741.
Goswami, D., & Chakraborty, S. (2015). Parametric optimization of ultrasonic machining process using gravitational search and fireworks algorithms. Ain Shams Engineering Journal, 6(1), 315-331.
Ho, K.H., & Newman, S.T. (2003). State of the art electrical discharge machining (EDM). International Journal of Machine Tools & Manufacture, 43(13), 1287-1300.
Ho, K.H., Newman, S.T., Rahimifard, S., & Allen, R.D. (2004). State of the art in wire electrical discharge machining (WEDM). International Journal of Machine Tools & Manufacture, 44(12-13), 1247-1259.
Jagadish., & Ray, A. (2015). Multi-objective optimization of green EDM: An integrated theory. Journal of the Institution of Engineers (India): Series C, 96(1), 41-47.
Janković, P., Igić, T., & Nikodijević, D. (2012). Process parameters effect on material removal mecha-nism and cut quality of abrasive water jet machining. Theoretical and Applied Mechanics, 40(S1), 277-291.
Jayadithya, R., Deekshith, B., Chaithnya, P.L., & Rajyalakshmi, G. (2014). Multi objective optimization of WEDM through Taguchi method and utility concept. International Journal of Science and Applied Information Technology, 3(4), 1-6.
Jegan, T.C.M., Ravindran, D., Dev Anand, M., & Rohit, I.J. (2013). ECM parameters modeling and opti-mization using WSGA. Applied Mechanics and Materials, 423-426, 925-930.
Kalaimathi, M., Venkatachalam, G., & Sivakumar, M. (2014). Experimental investigations on the electro-chemical machining characteristics of monel 400 alloys and optimization of process parameters. Jor-dan Journal of Mechanical and Industrial Engineering, 8(3), 143-151.
Kanish, T.C., Kuppan, P., Narayanan, S., & Ashok, S.D. (2014). A fuzzy logic based model to predict the improvement in surface roughness in magnetic field assisted abrasive finishing. Procedia Engineer-ing, 97, 1948-1956.
Kataria, R., Kumar, J., & Pabla, B.S. (2016). Experimental investigation and optimization of machining characteristics in ultrasonic machining of WC-Co composite using GRA method. Materials and Manu-facturing Processes, 31(5), 685-693.
Kibria, G., Doloi, B., & Bhattacharyya, B. (2013). Experimental investigation and multi-objective optimi-zation of Nd: YAG laser micro-turning process of alumina ceramic using orthogonal array and grey re-lational analysis. Optics & Laser Technology, 48, 16-27.
Kovačević, M., Madić, M., Radovanović, M., & Rančić, D. (2014). Software prototype for solving multi-objective machining optimization problems: Application in non-traditional machining processes. Ex-pert Systems with Applications, 41(13), 5657-5668.
Krishnan, S.A., & Samuel, G.L. (2013). Multi-objective optimization of material removal rate and surface roughness in wire electrical discharge turning. International Journal of Advanced Manufacturing Technology, 67(9-12), 2021-2032.
Kuar, A.S., Acherjee, B., Ganguly, D., & Mitra, S. (2012). Optimization of Nd: YAG laser parameters for microdrilling of alumina with multiquality characteristics via grey-Taguchi method. Materials and Manufacturing Processes, 27(3), 329-336.
Kuila, S. K., & Bose, G. K. (2015). Process parameters optimization of aluminium by grey-Taguchi meth-odology during AWJM process. International Journal of Innovation Research in Science, Engineering and Technology, 4(9), 124-131.
Kumar, K., & Agarwal, S. (2012). Multi-objective parametric optimization on machining with wire electric discharge machining. International Journal of Advanced Manufacturing Technology, 62(5-8), 617-633.
Kumar, H., Singh, S., & Kumar, P. (2013). Magnetic abrasive finishing - A review. International Journal of Engineering Research & Technology, 2(3), 1-9.
Kumar, J. (2014). Investigations into the surface quality and micro-hardness in the ultrasonic machining of titanium (ASTM GRADE-1). Journal of the Brazilian Society of Mechanical Sciences and Engineer-ing, 36(4), 807-823.
Kuriachen, B., Somashekhar, K.P., & Mathew, J. (2015). Multiresponse optimization of micro-wire elec-trical discharge machining process. International Journal of Advanced Manufacturing Technolo-gy, 76(1-4), 91-104.
Madic, M., Petkovic, D., & Radovanovic, M. (2014). GRA approach for multi-objective optimization of laser cutting. UPB Scientific Bulletin, Series B: Chemical and Material Science, 76(3), 169-180.
Madic, M., Radovanovic, M., Trajanovic, M., & Manic, M. (2015). Multi objective optimization of laser cutting using cuckoo search algorithm. Journal of Engineering Science and Technology, 10(3), 353-363.
Majumder, A. (2012). Parametric optimization of electric discharge machining by GA-based response sur-face methodology. Journal for Manufacturing Science and Production, 12(1), 25-30.
Majumder, A. (2013). Process parameter optimization during EDM of AISI 316 LN stainless steel by using fuzzy based multi-objective PSO. Journal of Mechanical Science and Technology, 27(7), 2143-2151.
Majumder, A., Das P.K., Majumder, A., & Debnath, M. (2014). An approach to optimize the EDM pro-cess parameters using desirability-based multi-objective PSO. Journal of Production and Manufactur-ing Research, 2(1), 228-240.
Majumder, A. (2015). Comparative study of three evolutionary algorithms coupled with neural network model for optimization of electric discharge machining process parameters. Proceedings of the Institu-tion of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(9), 1504-1516.
Malik, A., & Manna, A. (2017). Travelling wire electrochemical spark machining: An overview. In: Non-traditional micromachining processes. Eds. Kibria, G., Bhattacharyya, B., & Davim, J.P., Springer In-ternational Publishing.
Manikandan, N., Kumanan, S., & Sathiyanarayanan, C. (2015). Multi-response optimization of titanium Ti-6Al-4V alloy using Taguchi based grey relational analysis. Indian Journal of Engineering and Ma-terial Sciences, 22(2), 153-160.
Mediliyegedara, T.K.K.R., De Silva, A.K.M., Harrison, D.K., & McGeough, J.A. (2005). New develop-ments in the process control of the hybrid electro chemical discharge machining (ECDM) process. Journal of Materials Processing Technology, 167(2-3), 338-343.
Meijer, J. (2004). Laser beam machining (LBM), state of the art and new opportunities. Journal of Mate-rials Processing Technology, 149(1-3), 2-17.
Ming, W., Zhang, Z., Zhang, G., Huang, Y., Guo, J., & Chen, Y. (2014). Multi-objective optimization of 3D-surface topography of machining YG15 in WEDM. Materials and Manufacturing Process-es, 29(5), 514-525.
Ming, W., Ma, J., Zhang, Z., Huang, H., Shen, D., Zhang, G., & Huang, Y. (2016). Soft computing models and intelligent optimization system in electro-discharge machining of SiC/Al composites. International Journal of Advanced Manufacturing Technology, 87(1), 201-217.
Mishra, S., & Yadava, V. (2013a). Modeling and optimization of laser beam percussion drilling of nickel-based superalloy sheet using Nd: YAG laser. Optics and Lasers in Engineering, 51(6), 681-695.
Mishra, S., & Yadava, V. (2013b). Modeling and optimization of laser beam percussion drilling of thin al-uminium sheet. Optics & Laser Technology, 48, 461-474.
Moghaddam, M.A., Kolahan, F. (2015). Optimization of EDM process parameters using statistical analysis and simulated annealing algorithm. International Journal of Engineering, 28(1), 154-163.
Mohamad, A., Zain, A. M., Bazin, N. E. N., & Udin, A. (2015). A process prediction model based on cuckoo algorithm for abrasive waterjet machining. Journal of Intelligent Manufacturing, 26(6), 1247-1252.
Mohanty, C.P., Mahapatra, S.S., & Sahu, J. (2016a). Parametric optimisation of electrical discharge ma-chining process: A numerical approach. International Journal of Industrial and Systems Engineering, 22(2), 207-244.
Mohanty, C.P., Mahapatra, S.S., & Singh, M.R. (2016b). A particle swarm approach for multi-objective optimization of electrical discharge machining process. Journal of Intelligent Manufacturing, 27(6), 1171-1190.
Moosa, A. A. (2013). Utilizing a magnetic abrasive finishing technique (MAF) via adaptive neuro fuzzy (ANFIS). American Journal of Materials Engineering and Technology, 1(3), 49-53.
Mukherjee, R., & Chakraborty, S. (2012). Selection of EDM process parameters using biogeography-based optimization algorithm. Journal of Materials and Manufacturing Processes, 27(9), 954-962.
Mukherjee, R., Chakraborty, S., & Samanta, S. (2012). Selection of wire electrical discharge machining process parameters using non-traditional optimization algorithms. Applied Soft Computing, 12(8), 2506-2516.
Mukherjee, R., & Chakraborty, S. (2013). Selection of the optimal electrochemical machining process pa-rameters using biogeography-based optimization algorithm. International Journal of Advanced Manu-facturing and Technology, 64(5), 781-791.
Mukherjee, R., Goswami, D., & Chakraborty, S. (2013). Parametric optimization of Nd: YAG laser beam machining process using artificial bee colony algorithm. Journal of Industrial Engineer-ing, http://dx.doi.org/10.1155/2013/570250.
Nayak, B.B., & Mahapatra, S.S. (2014). A utility concept approach for multi-objective optimization of ta-per cutting operation using WEDM. Procedia Engineering, 97, 469-478.
Nayak, B.B., & Mahapatra, S.S. (2016). Optimization of WEDM process parameters using deep cryo-treated inconel 718 as work material. International Journal of Engineering Science and Technology, 19(1), 161-170.
Padhee, S., Nayak, N., Panda, S.K., Dhal, P.R., & Mahapatra, S.S. (2012). Multi-objective parametric op-timization of powder mixed electro-discharge machining using response surface methodology and non-dominated sorting genetic algorithm. Proceedings of Indian Academy of Sciences (Sadhana), 32(2), 223-240.
Panda, M. C., & Yadava, V. (2012). Intelligent modeling and multiobjective optimization of die sinking electrochemical spark machining process. Materials and Manufacturing Processes, 27(1), 10-25.
Panda, S., Mishra, D, Biswal, B.B., & Nanda, P. (2015). Optimization of multiple response characteristics of EDM process using Taguchi-based grey relational analysis and modified PSO. Journal of Advanced Manufacturing Systems, 14(3), 123-148.
Pandey, A. K., & Dubey, A. K. (2012a). Simultaneous optimization of multiple quality characteristics in laser cutting of titanium alloy sheet. Optics & Laser Technology, 44(6), 1858-1865.
Pandey, A. K., & Dubey, A. K. (2012b). Taguchi based fuzzy logic optimization of multiple quality char-acteristics in laser cutting of Duralumin sheet. Optics and Lasers in Engineering, 50(3), 328-335.
Pandey, A. K., & Dubey, A. K. (2013). Multiple quality optimization in laser cutting of difficult-to-laser-cut material using grey-fuzzy methodology. International Journal of Advanced Manufacturing Tech-nology, 65(1-4), 421-431.
Paul, L., & Hiremath, S. S. (2014). Evaluation of process parameters of ECDM using grey relational anal-ysis. Procedia Materials Science, 5, 2273-2282.
Pawar, P. J., & Rao, R. V. (2013). Parameter optimization of machining processes using teaching-learning-based optimization algorithm. International Journal of Advanced Manufacturing Technology, 67(5-8), 995-1006.
Pawar, P. J., & Rayate, G. B. (2014). Multi-objective optimization of laser beam machining process pa-rameters. International Journal of Advanced Mechanical Engineering, 4(3), 257-262.
Phipon, R., & Pradhan, B. B. (2012a). Control parameters optimization of laser beam machining using ge-netic algorithm. International Journal of Computational Engineering Research, 2(5), 1510-1516.
Phipon, R., & Pradhan, B. B. (2012b). Optimization of electro-chemical discharge machining process us-ing genetic algorithm. IOSR Journal of Engineering, 2(9), 106-115.
Porwal, R.K., Yadava, R.K., & Ramkumar, J. (2012). Artificial neural network modelling and multi-objective optimisation of hole drilling electro discharge micro machining of invar. International Jour-nal of Mechatronics and Manufacturing Systems, 5(5-6), 470-492.
Pradhan, M. K. (2012). Determination of optimal parameters with multi-response characteristics of EDM by response surface methodology, grey relational analysis and principal component analysis. Interna-tional Journal of Manufacturing Technology and Management, 26(1-4), 56-80.
Prasad, D.V.S.S.S.V., & Krishna, A.G. (2015). Empirical modelling and optimization of kerf and wire wear ratio in wire electrical discharge machining. International Journal of Advanced Manufacturing Technology, 77(1-4), 427-441.
Priyadarshini, M., & Pal, K. (2016). Multi-objective optimisation of EDM process using hybrid Taguchi-based methodologies for Ti-6Al-4V alloy. International Journal of Manufacturing Research, 11(2), 144-166.
Puri, A. B., & Banerjee, S. (2013). Multiple-response optimisation of electrochemical grinding characteris-tics through response surface methodology. International Journal of Advanced Manufacturing Tech-nology, 64(5-8), 715-725.
Radhika, N., Chandran, G.K., Shivaram, P., & Karthik, K.T. (2015). Multi-objective optimization of EDM parameters using grey relation analysis. Journal of Engineering Science and Technology, 10(1), 1-11.
Raja, S. B., Pramod C.V. K., Krishna, K. V., Ragunathan, A., & Vinesh, S. (2015). Optimization of elec-trical discharge machining parameters on hardened die steel using firefly algorithm. Journal of Engi-neering with Computers, 31(1), 1-9.
Rajurkar, K.P., Zhu, D., McGeough, J.A., Kozak, J., & De Silva, A. (1999). New developments in electro-chemical machining. Annals of the ClRP, 48(2), 567-579.
Rajyalakshmi, G., & Ramaiah, P.V. (2013). Multiple process parameter optimization of wire electrical dis-charge machining on Inconel 825 using Taguchi grey relational analysis. International Journal of Ad-vanced Manufacturing Technology, 69(5-8), 1249-1262.
Rao, P.S., Ramji, K., & Satyanarayana, B. (2014). Experimental investigation and optimization of wire EDM parameters for surface roughness, MRR and white layer in machining of aluminium al-loy. Procedia Materials Science, 5, 2197-2206.
Rao, T.B., & Krishna, A.G. (2014). Selection of optimal process parameters in WEDM while machining Al7075/SiCp metal matrix composites. International Journal of Advanced Manufacturing Technolo-gy, 73(1-4), 299-314.
Rao, S.M., & Padmanabham, G. (2015). Parametric optimization in electrochemical machining using utili-ty based Taguchi method. Journal of Engineering Science and Technology, 10(1), 81-96.
Rathod, P., Aravindan, S., & Rao, P. V. (2015). Parametric optimization during dry machining of titanium alloy (Ti6Al4V) with innovative textured tools for optimum product quality. International Journal of Engineering Development and Research, 4(3), 1067-1074.
Saha, A., & Mondal, S.C. (2016). Multi-objective optimization in WEDM process of nanostructured hard-facing materials through hybrid techniques. Measurement, 94, 46-59.
Saha, P., Tarafdar, D., Pal, S. K., Saha, P., Srivastava, A.K., & Das, K. (2013). Multi-objective optimiza-tion in wire-electro-discharge machining of TiC reinforced composite through neuro-genetic tech-nique. Applied Soft Computing, 13(4), 2065-2074.
Sahu, S.N., & Nayak, N.C. (2015). Multi-objective optimization of EDM process: RSM modelling and ge-netic algorithm approach. Journal of Production Engineering, 18(2), 29-32.
Sathisha, N., Hiremath, S. S., & Shivakumar, J. (2014). Prediction of material removal rate using regres-sion analysis and artificial neural network of ECDM process. International Journal of Recent Advances in Mechanical Engineering, 3(2), 69-81.
Sathiyamoorthy, V., Sekar, T., & Elango, N. (2015). Optimization of processing parameters in ECM of die tool steel using nanofluid by multi-objective genetic algorithm. The Scientific World Journal, http://dx.doi.org/10.1155/2015/895696.
Sathiyamoorthy, V., & Sekar, T. (2016). Optimisation of processing parameters in ECM of AISI 202 using multi objective genetic algorithm. International Journal of Enterprise Network Management, 7(2), 133-141.
Satyanarayana, B., & Srikar, G. (2014). Optimization of abrasive water jet machining process parameters using Taguchi grey relational analysis. International Journal of Mechanical and Production Engineer-ing, 2(9), 82-87.
Senthilkumar, C., Ganesan, G., & Karthikeyan, R. (2013). Influence of input parameters on characteristics of electro chemical machining process. International Journal of Applied Science and Engineering, 11(1), 13-24.
Shahali, H., Yazdi, M.R.S., Mohammadi, A., &Iimanian, E. (2012). Optimization of surface roughness and thickness of white layer in wire electrical discharge machining of DIN 1.4542 stainless steel using micro-genetic algorithm and signal to noise ratio techniques. Proceedings of the Institution of Mechani-cal Engineers, Part B: Journal of Engineering Manufacture, 226(5), 803-812.
Sharma, A., & Yadava, V. (2012). Modelling and optimization of cut quality during pulsed Nd: YAG laser cutting of thin Al-alloy sheet for straight profile. Optics & Laser Technology, 44(1), 159-168.
Sharma, A., & Yadava, V. (2013). Modelling and optimization of cut quality during pulsed Nd: YAG laser cutting of thin Al-alloy sheet for curved profile. Optics and Lasers in Engineering, 51(1), 77-88.
Shayan, A.V., Afza, R.A., & Teimouri, R. (2013). Parametric study along with selection of optimal solu-tions in dry wire cut machining of cemented tungsten carbide (WC-Co). Journal of Manufacturing Processes, 15(4), 644-658.
Shukla, A., & Singh, D. K. (2013). Modelling and optimization of magnetic abrasive finishing process. In-ternational Journal of Engineering Research and Technology, 2(9), 1471-1478.
Singh, S. (2012). Optimization of machining characteristics in electric discharge machining of 6061Al/Al2O3p/20P composites by grey relational analysis. International Journal of Advanced Manu-facturing Technology, 63(9), 1191-1202.
Singh, G. K., Yadava, V., & Kumar, R. (2012). Modelling and optimisation of electro-discharge diamond face grinding of cemented carbide-cobalt composite. International Journal of Industrial and Systems Engineering, 12(2), 141-164.
Singh, R., Walia, R. S., & Suri, N. M. (2015). Parametric optimization of centrifugal-magnetic force assist-ed abrasive flow machining process using utility concept. International Journal of Research in Engi-neering and Technology, 4(8), 382-388.
Singh, D., & Shukla, R. S. (2016). Optimisation of electrochemical micromachining and electrochemical discharge machining process parameters using firefly algorithm. International. Journal of Mechatron-ics and Manufacturing Systems, 9(2), 137-159.
Sohrabpoor, H., Khanghah, S.P., Shahraki, S., & Teimouri, R. (2016). Multi-objective optimization of electrochemical machining process. International Journal of Advanced Manufacturing Technology, 82(9), 1683-1692.
Solaiyappan, A., Kalaimathi, M., & Venkatachalam, G. (2014). Multi-objective optimization of process parameters for electrochemical machining of 6061Al/10%Wt Al2O3/5%Wt SiC composite using hybrid fuzzy-artificial bee colony algorithm. Jordan Journal of Mechanical and Industrial Engineering, 8(5), 323-331.
Somashekhar, K.P., Mathew, J., & Ramachandran, N. (2012). A feasibility approach by simulated anneal-ing on optimization of micro-wire electric discharge machining parameters. International Journal of Advanced Manufacturing Technology, 61(9-12), 1209-1213.
Subrahmanyam, S.V., & Sarcar, M.M.M. (2013). Evaluation of optimal parameters for machining with wire cut EDM using Grey-Taguchi method. International Journal of Scientific and Research Publica-tions, 3(3), 1-9.
Sundaram, M. M. (2014). Hybrid machining processes. In Nee, A.Y.C. (Ed.) Handbook of Manufacturing Engineering and Technology, 1109-1126.
Tamrin, K. F., Nukman, Y., Choudhury, I. A., & Shirley, S. (2015). Multiple-objective optimization in precision laser cutting of different thermoplastics. Optics and Lasers in Engineering, 67, 57-65.
Tang, L., & Yang, S. (2013). Experimental investigation on the electrochemical machining of 00Cr12Ni9Mo4Cu2 material and multi-objective parameters optimization. International Journal of Advanced Manufacturing Technology, 67(9), 2909-2916.
Tang, L., & Du, Y.T. (2014). Multi-objective optimization of green electrical discharge machining Ti-6Al-4V in tap water via grey-Taguchi method. Journal of Materials and Manufacturing Processes, 29(5), 507-513.
Teimouri, R., & Baseri, H. (2012). Improvement of dry EDM process characteristics using artificial soft computing methodologies. Journal of Production Engineering Research and Development, 6(4), 493-504.
Teimouri, R., & Baseri, H. (2013). Artificial evolutionary approaches to produce smoother surface in magnetic abrasive finishing of hardened AISI 52100 steel. Journal of Mechanical Science and Tech-nology, 27(2), 533-539.
Teimouri, R., & Baseri, H. (2014). Optimization of magnetic field assisted EDM using the continuous ACO algorithm. Applied Soft Computing, 14, 381-389.
Teimoiri, R., & Shorabpoor, H. (2013). Application of adaptive neuro-fuzzy inference system and cuckoo optimization algorithm for analyzing electrochemical machining process. Frontiers of Mechanical En-gineering, 8(4), 429-442.
Teimouri, R., Baseri, H., & Moharami, R. (2015). Multi-responses optimization of ultrasonic machining process. Journal of Intelligent Manufacturing, 26(4), 745-753.
Teixidor, D., Ferrer, I., Ciurana, J., & Ozel, T. (2013). Optimization of process parameters for pulsed laser milling of micro-channels on AISI H13 tool steel. Robotics and Computer-Integrated Manufactur-ing, 29(1), 209-218.
Thangadurai, K.R., & Asha, A. (2014). Parametric optimization of EDM process of aluminium boron car-bide composite using desirability function approach and genetic algorithm. Journal of Applied Me-chanics and Materials, 592-594, 684-688.
Thoe, T.B., Aspinwall, D.K., & Wise, M.L.H. (1998). Review on ultrasonic machining. International Journal of Machine Tools & Manufacture, 38(4), 239-255.
Uyyala, S.B., & Kumar, A. (2014). Performance analysis of electrical discharge machining parameters on RENE 80 nickel super alloy using statistical tools. International Journal of Machining and Machinabil-ity of Materials, 15(3-4), 212-234.
Varun, S., Rajyalakshmi, G., Reddy, B.B., & Reddy, R.R.V.V. (2016). Modelling and multi objective op-timization of WEDM of commercially monel super alloy using evolutionary algorithms. IOP Confer-ence Series: Materials Science and Engineering, 149(1), 1-15.
Yadav, R. N., Yadava, V., & Singh, G.K. (2012). Intelligent modeling of electro-discharge diamond face grinding (EDDFG). International Journal of Surface Engineering & Materials Technology, 2(2), 24-28.
Yadav, R. N., & Yadava, V. (2015). Application of soft computing techniques for modelling and optimi-zation of slotted-electrical discharge diamond face grinding process. Transactions of the Indian Insti-tute of Metals, 68(5), 981-990.
Yadav, R. N., Yadava, V., & Singh, G. K. (2013). Multi-objective optimization of process parameters in electro-discharge diamond face grinding based on ANN-NSGA-II hybrid technique. Frontiers of Me-chanical Engineering, 8(3), 319-332.
Yadav, R. N., Yadava, V., & Singh, G. K. (2014a). Application of non-dominated sorting genetic algo-rithm for multi-objective optimization of electrical discharge diamond face grinding process. Journal of Mechanical Science and Technology, 28(6), 2299-2306.
Yadav, R. N., Yadava, V., & Singh, G. K. (2014b). Application of response surface methodology and ge-netic algorithm for optimisation of electro-discharge diamond face grinding of tungsten carbide-cobalt composite. International Journal of Industrial and Systems Engineering, 18(1), 76-94.
Yadav, U.S., & Yadava, V. (2015). Experimental modelling and optimisation of process parameters of hole drilling by electrical discharge machining of aerospace titanium alloy. International Journal of Manufacturing Technology and Management, 29(3-4), 211-234.
Yang, R.T., Tzeng, C.J., Yang, Y.K., & Hsieh, M.H. (2012). Optimization of wire electrical discharge ma-chining process parameters for cutting tungsten. International Journal of Advanced Manufacturing Technology, 60(1-4), 135-147.
Yusup, N., Sarkheyli, A., Zain, A. M., Hashim, S. Z. M., & Ithnin, N. (2014). Estimation of optimal ma-chining control parameters using artificial bee colony. Journal of Intelligent Manufacturing, 25(6), 1463-1472.
Zhang, G., Zhang, Z., Ming, W., Guo, J., Huang, Y., & Shao, X. (2014). The multi-objective optimization of medium-speed WEDM process parameters for machining SKD11 steel by the hybrid method of RSM and NSGA-II. International Journal of Advanced Manufacturing Technology, 70(9), 2097-2109.