How to cite this paper
Bulan, R., Siregar, K., Wardhana, M., Lubis, H., Thamren, D., Haris, O & Sitorus, A. (2022). Experimental investigation into the performance of cutting betel nut machine via response surface methodology and desirability function.Engineering Solid Mechanics, 10(3), 253-262.
Refrences
Bulan, R., Ayu, E. S., & Sitorus, A. (2020). Effects of moisture content on some engineering properties of arecanut (Areca Catechu L.) fruit which are relevant to the design of processing equipment. INMATEH - Agricultural Engineering, 60(1), 61-70. doi:10.35633/INMATEH-60-07
Bulan, R., Siregar, K., Karyadi, A., T, D. S., & Sitorus, A. (2021a). The Finite Element Method (FEM) Approach to Determine Wire Loop Tooth and the Shaft of the Areca Nut Thresher Machine. International Journal of Mechanical Engineering and Robotics Research, 10(9), 493-497. doi:10.18178/ijmerr.10.9.493-497
Bulan, R., Siregar, K., Lesdiana, S. R., Anwar, K., & Sitorus, A. (2021b). Design and performance testing of areca nut thresher machine using solid triangle spike tooth type. Paper presented at the IOP Conference Series: Earth and Environmental Science.
Chabbi, A., Yallese, M. A., Meddour, I., Nouioua, M., Mabrouki, T., & Girardin, F. (2017). Predictive modeling and multi-response optimization of technological parameters in turning of Polyoxymethylene polymer (POM C) using RSM and desirability function. Measurement, 95, 99-115. doi:https://doi.org/10.1016/j.measurement.2016.09.043
Fu, J., Yuan, H., Zhang, D., Chen, Z., & Ren, L. (2020). Multi-objective optimization of process parameters of longitudinal axial threshing cylinder for frozen corn using RSM and NSGA-II. Applied Sciences, 10(5), 1646.
Ghafari, S., Aziz, H. A., Isa, M. H., & Zinatizadeh, A. A. (2009). Application of response surface methodology (RSM) to optimize coagulation–flocculation treatment of leachate using poly-aluminum chloride (PAC) and alum. Journal of Hazardous Materials, 163(2), 650-656. doi:https://doi.org/10.1016/j.jhazmat.2008.07.090
Hafezalkotob, A., Hami-Dindar, A., Rabie, N., & Hafezalkotob, A. (2018). A decision support system for agricultural machines and equipment selection: A case study on olive harvester machines. Computers and Electronics in Agriculture, 148, 207-216. doi:https://doi.org/10.1016/j.compag.2018.03.012
Henanto, H. (1996). Potential of betel palm as multipurpose plant in Indonesia. Majalah BPPT (Indonesia).
Hu, Y., Xiao, S., Wen, J., & Li, J. (2019). An ANP-multi-criteria-based methodology to construct maintenance networks for agricultural machinery cluster in a balanced scorecard context. Computers and Electronics in Agriculture, 158, 1-10. doi:https://doi.org/10.1016/j.compag.2019.01.031
Lakshminarayanan, A. K., & Balasubramanian, V. (2009). Comparison of RSM with ANN in predicting tensile strength of friction stir welded AA7039 aluminium alloy joints. Transactions of Nonferrous Metals Society of China, 19(1), 9-18. doi:https://doi.org/10.1016/S1003-6326(08)60221-6
Mehrijani, M., Khodaei, J., & Zareei, S. (2019). Modeling and optimizing of the energy consumption of moldboard plow using Response Surface Methodology (RSM).
Mendes, L. C., de Menezes, H. C., Aparecida, M., & da Silva, A. P. (2001). Optimization of the roasting of robusta coffee (C. canephora conillon) using acceptability tests and RSM. Food Quality and Preference, 12(2), 153-162. doi:https://doi.org/10.1016/S0950-3293(00)00042-2
Miri, M. A., Movaffagh, J., Najafi, M. B. H., Najafi, M. N., Ghorani, B., & Koocheki, A. (2016). Optimization of elecrospinning process of zein using central composite design. Fibers and Polymers, 17(5), 769-777. doi:10.1007/s12221-016-6064-0
Rahim, M. R. U., & Bharti, P. K. (2020). Buckling Analysis of Innovative Corrugated Column by using Response Surface Methodology. Acta Marisiensis. Seria Technologica, 17(2), 8-17.
Sinha, K., Chowdhury, S., Saha, P. D., & Datta, S. (2013). Modeling of microwave-assisted extraction of natural dye from seeds of Bixa orellana (Annatto) using response surface methodology (RSM) and artificial neural network (ANN). Industrial Crops and Products, 41, 165-171. doi:https://doi.org/10.1016/j.indcrop.2012.04.004
Sitorus, A., Nugraha, D., Rustamli, D., Muslimin, M., Hasan, A. R., & Bulan, R. (2019). Design and Construction of a Cutting Machines for Fresh Betel Nut (Areca Catechu Linn). Paper presented at the 5th International Conference on Computing Engineering and Design, ICCED 2019.
Yirgu, Z., Leta, S., Hussen, A., Khan, M. M., & Aragaw, T. (2021). Optimization of microwave-assisted carbohydrate extraction from indigenous Scenedesmus sp. grown in brewery effluent using response surface methodology. Heliyon, 7(5), e07115.
Bulan, R., Siregar, K., Karyadi, A., T, D. S., & Sitorus, A. (2021a). The Finite Element Method (FEM) Approach to Determine Wire Loop Tooth and the Shaft of the Areca Nut Thresher Machine. International Journal of Mechanical Engineering and Robotics Research, 10(9), 493-497. doi:10.18178/ijmerr.10.9.493-497
Bulan, R., Siregar, K., Lesdiana, S. R., Anwar, K., & Sitorus, A. (2021b). Design and performance testing of areca nut thresher machine using solid triangle spike tooth type. Paper presented at the IOP Conference Series: Earth and Environmental Science.
Chabbi, A., Yallese, M. A., Meddour, I., Nouioua, M., Mabrouki, T., & Girardin, F. (2017). Predictive modeling and multi-response optimization of technological parameters in turning of Polyoxymethylene polymer (POM C) using RSM and desirability function. Measurement, 95, 99-115. doi:https://doi.org/10.1016/j.measurement.2016.09.043
Fu, J., Yuan, H., Zhang, D., Chen, Z., & Ren, L. (2020). Multi-objective optimization of process parameters of longitudinal axial threshing cylinder for frozen corn using RSM and NSGA-II. Applied Sciences, 10(5), 1646.
Ghafari, S., Aziz, H. A., Isa, M. H., & Zinatizadeh, A. A. (2009). Application of response surface methodology (RSM) to optimize coagulation–flocculation treatment of leachate using poly-aluminum chloride (PAC) and alum. Journal of Hazardous Materials, 163(2), 650-656. doi:https://doi.org/10.1016/j.jhazmat.2008.07.090
Hafezalkotob, A., Hami-Dindar, A., Rabie, N., & Hafezalkotob, A. (2018). A decision support system for agricultural machines and equipment selection: A case study on olive harvester machines. Computers and Electronics in Agriculture, 148, 207-216. doi:https://doi.org/10.1016/j.compag.2018.03.012
Henanto, H. (1996). Potential of betel palm as multipurpose plant in Indonesia. Majalah BPPT (Indonesia).
Hu, Y., Xiao, S., Wen, J., & Li, J. (2019). An ANP-multi-criteria-based methodology to construct maintenance networks for agricultural machinery cluster in a balanced scorecard context. Computers and Electronics in Agriculture, 158, 1-10. doi:https://doi.org/10.1016/j.compag.2019.01.031
Lakshminarayanan, A. K., & Balasubramanian, V. (2009). Comparison of RSM with ANN in predicting tensile strength of friction stir welded AA7039 aluminium alloy joints. Transactions of Nonferrous Metals Society of China, 19(1), 9-18. doi:https://doi.org/10.1016/S1003-6326(08)60221-6
Mehrijani, M., Khodaei, J., & Zareei, S. (2019). Modeling and optimizing of the energy consumption of moldboard plow using Response Surface Methodology (RSM).
Mendes, L. C., de Menezes, H. C., Aparecida, M., & da Silva, A. P. (2001). Optimization of the roasting of robusta coffee (C. canephora conillon) using acceptability tests and RSM. Food Quality and Preference, 12(2), 153-162. doi:https://doi.org/10.1016/S0950-3293(00)00042-2
Miri, M. A., Movaffagh, J., Najafi, M. B. H., Najafi, M. N., Ghorani, B., & Koocheki, A. (2016). Optimization of elecrospinning process of zein using central composite design. Fibers and Polymers, 17(5), 769-777. doi:10.1007/s12221-016-6064-0
Rahim, M. R. U., & Bharti, P. K. (2020). Buckling Analysis of Innovative Corrugated Column by using Response Surface Methodology. Acta Marisiensis. Seria Technologica, 17(2), 8-17.
Sinha, K., Chowdhury, S., Saha, P. D., & Datta, S. (2013). Modeling of microwave-assisted extraction of natural dye from seeds of Bixa orellana (Annatto) using response surface methodology (RSM) and artificial neural network (ANN). Industrial Crops and Products, 41, 165-171. doi:https://doi.org/10.1016/j.indcrop.2012.04.004
Sitorus, A., Nugraha, D., Rustamli, D., Muslimin, M., Hasan, A. R., & Bulan, R. (2019). Design and Construction of a Cutting Machines for Fresh Betel Nut (Areca Catechu Linn). Paper presented at the 5th International Conference on Computing Engineering and Design, ICCED 2019.
Yirgu, Z., Leta, S., Hussen, A., Khan, M. M., & Aragaw, T. (2021). Optimization of microwave-assisted carbohydrate extraction from indigenous Scenedesmus sp. grown in brewery effluent using response surface methodology. Heliyon, 7(5), e07115.