This paper investigates various techniques used to solve the differential equations governing the free vibration of columns. The present work focuses on the study of the free vibration of Euler’s Bernoulli column of equal strength in compression, considering its own weight and the axial load in compression and tension while subjected to symmetrical boundary conditions. The investigation utilizes the differential quadrature method to examine the fifth natural frequency parameters of the column in different states of column boundary conditions and varying geometric section shapes, including pin-pin and clamp-clamp configurations. The results of this work contribute valuable insights for informed decisions on selecting the cross-section types and appropriate boundary conditions for ensuring the stability of such columns in civil constructions.

One of the most significant parameters which should be considered by all engineers is improving structures’ strength subjected to lateral load. Steel shear wall whose duty is to affect lateral load (wind and earthquake) is a wall which consists of shear part. Application of low yield point (LYP) steel in shear walls allows the employment of moderate and/or stocky infill plates with low yielding and high buckling capacities, which can result in enhanced buckling stability, serviceability, and energy dissipation capacity of such systems. Infill LYP plate is used to improve shear wall behavior which leads to enhancement of stiffness. In the present research, infill plate with spherical appendages is applied, and its impact on plate stiffness, cyclic behavior and energy absorption are investigated. The spherical diameter has been chosen respectively 10 and 20 cm distributed with two patterns (diagonal and plus form). The best performance is for a LYP plate with a 10 cm spherical diagonal pattern.

Nowadays, in order to increase construction of tall structures, the importance of choosing optimum systems, with a huge energy absorption capacity against wind and earthquake loads, has been widely considered. Since four decades ago, steel shear walls had been used as a stiff and high performance lateral system. This study is about the effect of concrete filled steel tubes (CFT) columns as vertical boundary elements of steel shear wall on seismic behavior of steel structures. Due to do this, three 10-storey steel structures, with similar plans and lateral load career systems of steel shear wall, coinciding X-bracing, and moderate steel frame were analyzed by means of non-linear, time-history method through SAP2000 software, and the results of roof displacement of them were compared with each other. Also after validating a two-storey, single-span frame sample with steel shear walls and CFT columns, 3 single-storey structures were analyzed by means of hysteresis and pushover, through ABAQUS software. The results of this study showed that a shear wall system presents suitable stiffness, resistance and ductility in comparison with other lateral bearing systems.

Study of behavior of building structures under blast loads is an important issue for design of high reliable structures made of concrete material. Hence, in previous studies the enclosed wall under blast loads, open-air explosion has been investigated through experiments. In this study, the experimental results reported in the literature for dynamic performance of a masonry wall subjected to high strain dynamic loads (i.e. contact blast and air burst test) are simulated numerically using finite element method (FEM) by utilizing soft particle hydrodynamics (SPH). Comparison of simulated numerical results with the experimental data demonstrates the ability and accuracy of FEM analyses in predicting the response of confined masonry walls subjected to dynamic loads.

Tower cranes, on today’s typical building construction sites, are the centerpiece of production, hoisting and transporting of a variety of loads. Due to a simple crane limited capacity; there is an urgent need to use high capacity cranes such as tower cranes. However, we have to select an appropriate type of cranes to be utilized to reduce the associated coste as much as possible. In this research, we propose a method to select the suitable type of crane and locate the best place for crane erection based on a minimum radius for requested crane and minimum cost. To fulfill the target, a computer program is designed to numerate these problems, demonstrating an example explaining how to apply the program and the results are discussed.

In this study, the behavior of two buildings designed with steel structures Buckling Restrained Braced (BRB) and conventional bending frame was studied to analyze their strengths against progressive collapse. The structures were designed and analyzed in accordance with Iranian regulation No. 2800 for the design of buildings. Using nonlinear static pushover analysis, the performance of the structure after removal of the center and the corner columns were investigated and it was demonstrated that removing the corner column provides more critical conditions for the investigated buildings. Furthermore, the use of BRB elements provides better performance for the analyzed buildings due to the ability of BRB in absorbing and dissipating more energy induced from the external loading sources like the earthquake.

In the present study, the flexural behavior of concrete beams reinforced with longitudinal rebars made of glass fiber reinforced polymer composites (GFRP), is studied using finite element method. For this purpose, a number of concrete beams with square sections are modeled in ABAQUS. In all of the beams, four GFRP rebars with diameter of 12 mm, and 10 steel rebars with diameter of 8 mm are vertically used to prevent creating shear cracks in the beams. The beam no. 1 is without transverse rebar, beam no. 2 has a row of transverse rebar, which is placed at the bottom and in the plane of vertical rebars. Beam no. 3 has a row of transverse rebars that is placed at the top and in the plane of vertical rebars; and the beam no. 4 has two rows of transverse rebar at the top and bottom of the beam in the plane of vertical rebars. The beams are gradually loaded under up to 6 ton, and the amounts of displacement and strain at the middle of beams are compared together. The obtained results reveal that the force-displacement diagram of reinforced beams with composite rebars are almost linear until ultimate phase, and in all of the beams, adding transverse rebar leads to less deflection in the middle of the beam under an identical loading. Moreover, the load bearing capacity of beams containing transverse rebars, were higher than the other beams.

When a structure is influenced by the earthquake external force, some energy imposed to the structure is dissipated and remained energy causes structure displacements. Dissipated energy in the structure depends on the type of structure and its optimal engineering design. In any typical structure, the type of connections, stiffness of structure, dampers, place of windfall and damper and other factors play significant role in the amount of dissipated energy. This article introduces a new resilience factor which is a function of energy dissipation factors of input seismic energy. Mathematical equations are presented for this factor and its limits are determined for different periods. The applicability of the proposed factor is also investigated for two typical structural examples.

Various methods are available to reinforce concrete members and structures. Wrapping the concrete beams with composite sheets is one of the suggested methods for increasing the load bearing capacity of concrete beams and specially those containing opening. In this paper, the influence of using two composite sheets reinforced with carbon (CFRP) and glass (GFRP) is studied on increasing the strength of concrete beams having opening. A number of concrete beams with and without openings were modeled in ANSYS and using the nonlinear analyses, the initial cracking load, ultimate failure load, cracking pattern and deflection were determined numerically for each beam. Different wrapping schemes were examined for increasing the load bearing capacity of the opening section and it was concluded that wrapping from both inside and exterior of opening with the mentioned composite patches provide the most enhancement in the opening zone. Also the CFRP patch showed better performance in comparison with the GFRP wrapping.

High performance fiber-reinforced cementitious composites (HPFRCC) are aggregates like cement grout with fine grains and fibers which can be used in many cases like seismic improvement of building components. One of these building components is connecting beam in coupled shear wall which can increase plasticity and energy absorption. In this paper nonlinear finite element model of coupled beam containing HPFRCC is analyzed and the influence diagonal reinforcement is investigated on cracking patterns, stress contours and hysteresis diagrams of shear wall. It was observed that diagonal reinforcements play significant role in shear load bearing capacity of shear wall coupled with HPFRCC beam.